matplotlib.quiver.Barbs#
- class matplotlib.quiver.Barbs(ax, *args, pivot='tip', length=7, barbcolor=None, flagcolor=None, sizes=None, fill_empty=False, barb_increments=None, rounding=True, flip_barb=False, **kwargs)[source]#
Bases:
PolyCollection
Specialized PolyCollection for barbs.
The only API method is
set_UVC()
, which can be used to change the size, orientation, and color of the arrows. Locations are changed using theset_offsets()
collection method. Possibly this method will be useful in animations.There is one internal function
_find_tails()
which finds exactly what should be put on the barb given the vector magnitude. From there_make_barbs()
is used to find the vertices of the polygon to represent the barb based on this information.The constructor takes one required argument, an Axes instance, followed by the args and kwargs described by the following pyplot interface documentation:
Plot a 2D field of barbs.
Call signature:
barbs([X, Y], U, V, [C], **kwargs)
Where X, Y define the barb locations, U, V define the barb directions, and C optionally sets the color.
All arguments may be 1D or 2D. U, V, C may be masked arrays, but masked X, Y are not supported at present.
Barbs are traditionally used in meteorology as a way to plot the speed and direction of wind observations, but can technically be used to plot any two dimensional vector quantity. As opposed to arrows, which give vector magnitude by the length of the arrow, the barbs give more quantitative information about the vector magnitude by putting slanted lines or a triangle for various increments in magnitude, as show schematically below:
: /\ \ : / \ \ : / \ \ \ : / \ \ \ : ------------------------------
The largest increment is given by a triangle (or "flag"). After those come full lines (barbs). The smallest increment is a half line. There is only, of course, ever at most 1 half line. If the magnitude is small and only needs a single half-line and no full lines or triangles, the half-line is offset from the end of the barb so that it can be easily distinguished from barbs with a single full line. The magnitude for the barb shown above would nominally be 65, using the standard increments of 50, 10, and 5.
See also https://en.wikipedia.org/wiki/Wind_barb.
- Parameters:
- X, Y1D or 2D array-like, optional
The x and y coordinates of the barb locations. See pivot for how the barbs are drawn to the x, y positions.
If not given, they will be generated as a uniform integer meshgrid based on the dimensions of U and V.
If X and Y are 1D but U, V are 2D, X, Y are expanded to 2D using
X, Y = np.meshgrid(X, Y)
. In this caselen(X)
andlen(Y)
must match the column and row dimensions of U and V.- U, V1D or 2D array-like
The x and y components of the barb shaft.
- C1D or 2D array-like, optional
Numeric data that defines the barb colors by colormapping via norm and cmap.
This does not support explicit colors. If you want to set colors directly, use barbcolor instead.
- lengthfloat, default: 7
Length of the barb in points; the other parts of the barb are scaled against this.
- pivot{'tip', 'middle'} or float, default: 'tip'
The part of the arrow that is anchored to the X, Y grid. The barb rotates about this point. This can also be a number, which shifts the start of the barb that many points away from grid point.
- barbcolorcolor or color sequence
The color of all parts of the barb except for the flags. This parameter is analogous to the edgecolor parameter for polygons, which can be used instead. However this parameter will override facecolor.
- flagcolorcolor or color sequence
The color of any flags on the barb. This parameter is analogous to the facecolor parameter for polygons, which can be used instead. However, this parameter will override facecolor. If this is not set (and C has not either) then flagcolor will be set to match barbcolor so that the barb has a uniform color. If C has been set, flagcolor has no effect.
- sizesdict, optional
A dictionary of coefficients specifying the ratio of a given feature to the length of the barb. Only those values one wishes to override need to be included. These features include:
'spacing' - space between features (flags, full/half barbs)
'height' - height (distance from shaft to top) of a flag or full barb
'width' - width of a flag, twice the width of a full barb
'emptybarb' - radius of the circle used for low magnitudes
- fill_emptybool, default: False
Whether the empty barbs (circles) that are drawn should be filled with the flag color. If they are not filled, the center is transparent.
- roundingbool, default: True
Whether the vector magnitude should be rounded when allocating barb components. If True, the magnitude is rounded to the nearest multiple of the half-barb increment. If False, the magnitude is simply truncated to the next lowest multiple.
- barb_incrementsdict, optional
A dictionary of increments specifying values to associate with different parts of the barb. Only those values one wishes to override need to be included.
'half' - half barbs (Default is 5)
'full' - full barbs (Default is 10)
'flag' - flags (default is 50)
- flip_barbbool or array-like of bool, default: False
Whether the lines and flags should point opposite to normal. Normal behavior is for the barbs and lines to point right (comes from wind barbs having these features point towards low pressure in the Northern Hemisphere).
A single value is applied to all barbs. Individual barbs can be flipped by passing a bool array of the same size as U and V.
- Returns:
- barbs
Barbs
- barbs
- Other Parameters:
- dataindexable object, optional
DATA_PARAMETER_PLACEHOLDER
- **kwargs
The barbs can further be customized using
PolyCollection
keyword arguments:Property
Description
a filter function, which takes a (m, n, 3) float array and a dpi value, and returns a (m, n, 3) array and two offsets from the bottom left corner of the image
array-like or scalar or None
bool
antialiased
or aa or antialiasedsbool or list of bools
array-like or None
CapStyle
or {'butt', 'projecting', 'round'}(vmin: float, vmax: float)
bool
Patch or (Path, Transform) or None
Colormap
or str or Nonecolor or list of RGBA tuples
edgecolor
or ec or edgecolorscolor or list of colors or 'face'
facecolor
or facecolors or fccolor or list of colors
str
{'/', '\', '|', '-', '+', 'x', 'o', 'O', '.', '*'}
bool
JoinStyle
or {'miter', 'round', 'bevel'}object
linestyle
or dashes or linestyles or lsstr or tuple or list thereof
linewidth
or linewidths or lwfloat or list of floats
bool
Normalize
or str or Noneoffset_transform
or transOffsetunknown
(N, 2) or (2,) array-like
list of array-like
None or bool or float or callable
unknown
bool
sizes
ndarray or None
(scale: float, length: float, randomness: float)
bool or None
str
list of str or None
list of array-like
unknown
bool
float
- barbs_doc = '\nPlot a 2D field of barbs.\n\nCall signature::\n\n barbs([X, Y], U, V, [C], **kwargs)\n\nWhere *X*, *Y* define the barb locations, *U*, *V* define the barb\ndirections, and *C* optionally sets the color.\n\nAll arguments may be 1D or 2D. *U*, *V*, *C* may be masked arrays, but masked\n*X*, *Y* are not supported at present.\n\nBarbs are traditionally used in meteorology as a way to plot the speed\nand direction of wind observations, but can technically be used to\nplot any two dimensional vector quantity. As opposed to arrows, which\ngive vector magnitude by the length of the arrow, the barbs give more\nquantitative information about the vector magnitude by putting slanted\nlines or a triangle for various increments in magnitude, as show\nschematically below::\n\n : /\\ \\\n : / \\ \\\n : / \\ \\ \\\n : / \\ \\ \\\n : ------------------------------\n\nThe largest increment is given by a triangle (or "flag"). After those\ncome full lines (barbs). The smallest increment is a half line. There\nis only, of course, ever at most 1 half line. If the magnitude is\nsmall and only needs a single half-line and no full lines or\ntriangles, the half-line is offset from the end of the barb so that it\ncan be easily distinguished from barbs with a single full line. The\nmagnitude for the barb shown above would nominally be 65, using the\nstandard increments of 50, 10, and 5.\n\nSee also https://en.wikipedia.org/wiki/Wind_barb.\n\nParameters\n----------\nX, Y : 1D or 2D array-like, optional\n The x and y coordinates of the barb locations. See *pivot* for how the\n barbs are drawn to the x, y positions.\n\n If not given, they will be generated as a uniform integer meshgrid based\n on the dimensions of *U* and *V*.\n\n If *X* and *Y* are 1D but *U*, *V* are 2D, *X*, *Y* are expanded to 2D\n using ``X, Y = np.meshgrid(X, Y)``. In this case ``len(X)`` and ``len(Y)``\n must match the column and row dimensions of *U* and *V*.\n\nU, V : 1D or 2D array-like\n The x and y components of the barb shaft.\n\nC : 1D or 2D array-like, optional\n Numeric data that defines the barb colors by colormapping via *norm* and\n *cmap*.\n\n This does not support explicit colors. If you want to set colors directly,\n use *barbcolor* instead.\n\nlength : float, default: 7\n Length of the barb in points; the other parts of the barb\n are scaled against this.\n\npivot : {\'tip\', \'middle\'} or float, default: \'tip\'\n The part of the arrow that is anchored to the *X*, *Y* grid. The barb\n rotates about this point. This can also be a number, which shifts the\n start of the barb that many points away from grid point.\n\nbarbcolor : color or color sequence\n The color of all parts of the barb except for the flags. This parameter\n is analogous to the *edgecolor* parameter for polygons, which can be used\n instead. However this parameter will override facecolor.\n\nflagcolor : color or color sequence\n The color of any flags on the barb. This parameter is analogous to the\n *facecolor* parameter for polygons, which can be used instead. However,\n this parameter will override facecolor. If this is not set (and *C* has\n not either) then *flagcolor* will be set to match *barbcolor* so that the\n barb has a uniform color. If *C* has been set, *flagcolor* has no effect.\n\nsizes : dict, optional\n A dictionary of coefficients specifying the ratio of a given\n feature to the length of the barb. Only those values one wishes to\n override need to be included. These features include:\n\n - \'spacing\' - space between features (flags, full/half barbs)\n - \'height\' - height (distance from shaft to top) of a flag or full barb\n - \'width\' - width of a flag, twice the width of a full barb\n - \'emptybarb\' - radius of the circle used for low magnitudes\n\nfill_empty : bool, default: False\n Whether the empty barbs (circles) that are drawn should be filled with\n the flag color. If they are not filled, the center is transparent.\n\nrounding : bool, default: True\n Whether the vector magnitude should be rounded when allocating barb\n components. If True, the magnitude is rounded to the nearest multiple\n of the half-barb increment. If False, the magnitude is simply truncated\n to the next lowest multiple.\n\nbarb_increments : dict, optional\n A dictionary of increments specifying values to associate with\n different parts of the barb. Only those values one wishes to\n override need to be included.\n\n - \'half\' - half barbs (Default is 5)\n - \'full\' - full barbs (Default is 10)\n - \'flag\' - flags (default is 50)\n\nflip_barb : bool or array-like of bool, default: False\n Whether the lines and flags should point opposite to normal.\n Normal behavior is for the barbs and lines to point right (comes from wind\n barbs having these features point towards low pressure in the Northern\n Hemisphere).\n\n A single value is applied to all barbs. Individual barbs can be flipped by\n passing a bool array of the same size as *U* and *V*.\n\nReturns\n-------\nbarbs : `~matplotlib.quiver.Barbs`\n\nOther Parameters\n----------------\ndata : indexable object, optional\n DATA_PARAMETER_PLACEHOLDER\n\n**kwargs\n The barbs can further be customized using `.PolyCollection` keyword\n arguments:\n\n \n .. table::\n :class: property-table\n\n ================================================================================================= ==============================================================================================================================================================\n Property Description \n ================================================================================================= ==============================================================================================================================================================\n :meth:`agg_filter <matplotlib.artist.Artist.set_agg_filter>` a filter function, which takes a (m, n, 3) float array and a dpi value, and returns a (m, n, 3) array and two offsets from the bottom left corner of the image\n :meth:`alpha <matplotlib.collections.Collection.set_alpha>` array-like or scalar or None \n :meth:`animated <matplotlib.artist.Artist.set_animated>` bool \n :meth:`antialiased <matplotlib.collections.Collection.set_antialiased>` or aa or antialiaseds bool or list of bools \n :meth:`array <matplotlib.cm.ScalarMappable.set_array>` array-like or None \n :meth:`capstyle <matplotlib.collections.Collection.set_capstyle>` `.CapStyle` or {\'butt\', \'projecting\', \'round\'} \n :meth:`clim <matplotlib.cm.ScalarMappable.set_clim>` (vmin: float, vmax: float) \n :meth:`clip_box <matplotlib.artist.Artist.set_clip_box>` `.Bbox` \n :meth:`clip_on <matplotlib.artist.Artist.set_clip_on>` bool \n :meth:`clip_path <matplotlib.artist.Artist.set_clip_path>` Patch or (Path, Transform) or None \n :meth:`cmap <matplotlib.cm.ScalarMappable.set_cmap>` `.Colormap` or str or None \n :meth:`color <matplotlib.collections.Collection.set_color>` color or list of RGBA tuples \n :meth:`edgecolor <matplotlib.collections.Collection.set_edgecolor>` or ec or edgecolors color or list of colors or \'face\' \n :meth:`facecolor <matplotlib.collections.Collection.set_facecolor>` or facecolors or fc color or list of colors \n :meth:`figure <matplotlib.artist.Artist.set_figure>` `.Figure` \n :meth:`gid <matplotlib.artist.Artist.set_gid>` str \n :meth:`hatch <matplotlib.collections.Collection.set_hatch>` {\'/\', \'\\\\\', \'|\', \'-\', \'+\', \'x\', \'o\', \'O\', \'.\', \'*\'} \n :meth:`in_layout <matplotlib.artist.Artist.set_in_layout>` bool \n :meth:`joinstyle <matplotlib.collections.Collection.set_joinstyle>` `.JoinStyle` or {\'miter\', \'round\', \'bevel\'} \n :meth:`label <matplotlib.artist.Artist.set_label>` object \n :meth:`linestyle <matplotlib.collections.Collection.set_linestyle>` or dashes or linestyles or ls str or tuple or list thereof \n :meth:`linewidth <matplotlib.collections.Collection.set_linewidth>` or linewidths or lw float or list of floats \n :meth:`mouseover <matplotlib.artist.Artist.set_mouseover>` bool \n :meth:`norm <matplotlib.cm.ScalarMappable.set_norm>` `.Normalize` or str or None \n :meth:`offset_transform <matplotlib.collections.Collection.set_offset_transform>` or transOffset unknown \n :meth:`offsets <matplotlib.collections.Collection.set_offsets>` (N, 2) or (2,) array-like \n :meth:`path_effects <matplotlib.artist.Artist.set_path_effects>` `.AbstractPathEffect` \n :meth:`paths <matplotlib.collections.PolyCollection.set_verts>` list of array-like \n :meth:`picker <matplotlib.artist.Artist.set_picker>` None or bool or float or callable \n :meth:`pickradius <matplotlib.collections.Collection.set_pickradius>` unknown \n :meth:`rasterized <matplotlib.artist.Artist.set_rasterized>` bool \n :meth:`sizes <matplotlib.collections._CollectionWithSizes.set_sizes>` ndarray or None \n :meth:`sketch_params <matplotlib.artist.Artist.set_sketch_params>` (scale: float, length: float, randomness: float) \n :meth:`snap <matplotlib.artist.Artist.set_snap>` bool or None \n :meth:`transform <matplotlib.artist.Artist.set_transform>` `.Transform` \n :meth:`url <matplotlib.artist.Artist.set_url>` str \n :meth:`urls <matplotlib.collections.Collection.set_urls>` list of str or None \n :meth:`verts <matplotlib.collections.PolyCollection.set_verts>` list of array-like \n :meth:`verts_and_codes <matplotlib.collections.PolyCollection.set_verts_and_codes>` unknown \n :meth:`visible <matplotlib.artist.Artist.set_visible>` bool \n :meth:`zorder <matplotlib.artist.Artist.set_zorder>` float \n ================================================================================================= ==============================================================================================================================================================\n\n'#
- set(*, UVC=<UNSET>, agg_filter=<UNSET>, alpha=<UNSET>, animated=<UNSET>, antialiased=<UNSET>, array=<UNSET>, capstyle=<UNSET>, clim=<UNSET>, clip_box=<UNSET>, clip_on=<UNSET>, clip_path=<UNSET>, cmap=<UNSET>, color=<UNSET>, edgecolor=<UNSET>, facecolor=<UNSET>, gid=<UNSET>, hatch=<UNSET>, in_layout=<UNSET>, joinstyle=<UNSET>, label=<UNSET>, linestyle=<UNSET>, linewidth=<UNSET>, mouseover=<UNSET>, norm=<UNSET>, offset_transform=<UNSET>, offsets=<UNSET>, path_effects=<UNSET>, paths=<UNSET>, picker=<UNSET>, pickradius=<UNSET>, rasterized=<UNSET>, sizes=<UNSET>, sketch_params=<UNSET>, snap=<UNSET>, transform=<UNSET>, url=<UNSET>, urls=<UNSET>, verts=<UNSET>, verts_and_codes=<UNSET>, visible=<UNSET>, zorder=<UNSET>)[source]#
Set multiple properties at once.
Supported properties are
Property
Description
unknown
a filter function, which takes a (m, n, 3) float array and a dpi value, and returns a (m, n, 3) array and two offsets from the bottom left corner of the image
array-like or scalar or None
bool
antialiased
or aa or antialiasedsbool or list of bools
array-like or None
CapStyle
or {'butt', 'projecting', 'round'}(vmin: float, vmax: float)
bool
Patch or (Path, Transform) or None
Colormap
or str or Nonecolor or list of RGBA tuples
edgecolor
or ec or edgecolorscolor or list of colors or 'face'
facecolor
or facecolors or fccolor or list of colors
str
{'/', '\', '|', '-', '+', 'x', 'o', 'O', '.', '*'}
bool
JoinStyle
or {'miter', 'round', 'bevel'}object
linestyle
or dashes or linestyles or lsstr or tuple or list thereof
linewidth
or linewidths or lwfloat or list of floats
bool
Normalize
or str or Noneoffset_transform
or transOffsetunknown
sequence of pairs of floats
list of array-like
None or bool or float or callable
unknown
bool
sizes
ndarray or None
(scale: float, length: float, randomness: float)
bool or None
str
list of str or None
list of array-like
unknown
bool
float