Source code for matplotlib.widgets

"""
GUI neutral widgets
===================

Widgets that are designed to work for any of the GUI backends.
All of these widgets require you to predefine a `matplotlib.axes.Axes`
instance and pass that as the first parameter.  Matplotlib doesn't try to
be too smart with respect to layout -- you will have to figure out how
wide and tall you want your Axes to be to accommodate your widget.
"""

from contextlib import ExitStack
import copy
from numbers import Integral

import numpy as np

from . import cbook, rcParams
from .lines import Line2D
from .patches import Circle, Rectangle, Ellipse
from .transforms import blended_transform_factory


[docs]class LockDraw: """ Some widgets, like the cursor, draw onto the canvas, and this is not desirable under all circumstances, like when the toolbar is in zoom-to-rect mode and drawing a rectangle. To avoid this, a widget can acquire a canvas' lock with ``canvas.widgetlock(widget)`` before drawing on the canvas; this will prevent other widgets from doing so at the same time (if they also try to acquire the lock first). """ def __init__(self): self._owner = None def __call__(self, o): """Reserve the lock for *o*.""" if not self.available(o): raise ValueError('already locked') self._owner = o
[docs] def release(self, o): """Release the lock from *o*.""" if not self.available(o): raise ValueError('you do not own this lock') self._owner = None
[docs] def available(self, o): """Return whether drawing is available to *o*.""" return not self.locked() or self.isowner(o)
[docs] def isowner(self, o): """Return whether *o* owns this lock.""" return self._owner is o
[docs] def locked(self): """Return whether the lock is currently held by an owner.""" return self._owner is not None
[docs]class Widget: """ Abstract base class for GUI neutral widgets """ drawon = True eventson = True _active = True
[docs] def set_active(self, active): """Set whether the widget is active. """ self._active = active
[docs] def get_active(self): """Get whether the widget is active. """ return self._active
# set_active is overridden by SelectorWidgets. active = property(get_active, set_active, doc="Is the widget active?")
[docs] def ignore(self, event): """ Return whether *event* should be ignored. This method should be called at the beginning of any event callback. """ return not self.active
[docs]class AxesWidget(Widget): """ Widget that is connected to a single `~matplotlib.axes.Axes`. To guarantee that the widget remains responsive and not garbage-collected, a reference to the object should be maintained by the user. This is necessary because the callback registry maintains only weak-refs to the functions, which are member functions of the widget. If there are no references to the widget object it may be garbage collected which will disconnect the callbacks. Attributes ---------- ax : `~matplotlib.axes.Axes` The parent axes for the widget. canvas : `~matplotlib.backend_bases.FigureCanvasBase` subclass The parent figure canvas for the widget. active : bool If False, the widget does not respond to events. """ def __init__(self, ax): self.ax = ax self.canvas = ax.figure.canvas self.cids = []
[docs] def connect_event(self, event, callback): """ Connect callback with an event. This should be used in lieu of `figure.canvas.mpl_connect` since this function stores callback ids for later clean up. """ cid = self.canvas.mpl_connect(event, callback) self.cids.append(cid)
[docs] def disconnect_events(self): """Disconnect all events created by this widget.""" for c in self.cids: self.canvas.mpl_disconnect(c)
[docs]class Button(AxesWidget): """ A GUI neutral button. For the button to remain responsive you must keep a reference to it. Call `.on_clicked` to connect to the button. Attributes ---------- ax The `matplotlib.axes.Axes` the button renders into. label A `matplotlib.text.Text` instance. color The color of the button when not hovering. hovercolor The color of the button when hovering. """ def __init__(self, ax, label, image=None, color='0.85', hovercolor='0.95'): """ Parameters ---------- ax : `~matplotlib.axes.Axes` The `~.axes.Axes` instance the button will be placed into. label : str The button text. Accepts string. image : array-like or PIL image The image to place in the button, if not *None*. Supported inputs are the same as for `.Axes.imshow`. color : color The color of the button when not activated. hovercolor : color The color of the button when the mouse is over it. """ AxesWidget.__init__(self, ax) if image is not None: ax.imshow(image) self.label = ax.text(0.5, 0.5, label, verticalalignment='center', horizontalalignment='center', transform=ax.transAxes) self.cnt = 0 self.observers = {} self.connect_event('button_press_event', self._click) self.connect_event('button_release_event', self._release) self.connect_event('motion_notify_event', self._motion) ax.set_navigate(False) ax.set_facecolor(color) ax.set_xticks([]) ax.set_yticks([]) self.color = color self.hovercolor = hovercolor self._lastcolor = color def _click(self, event): if (self.ignore(event) or event.inaxes != self.ax or not self.eventson): return if event.canvas.mouse_grabber != self.ax: event.canvas.grab_mouse(self.ax) def _release(self, event): if (self.ignore(event) or event.canvas.mouse_grabber != self.ax): return event.canvas.release_mouse(self.ax) if (not self.eventson or event.inaxes != self.ax): return for cid, func in self.observers.items(): func(event) def _motion(self, event): if self.ignore(event): return if event.inaxes == self.ax: c = self.hovercolor else: c = self.color if c != self._lastcolor: self.ax.set_facecolor(c) self._lastcolor = c if self.drawon: self.ax.figure.canvas.draw()
[docs] def on_clicked(self, func): """ Connect the callback function *func* to button click events. Returns a connection id, which can be used to disconnect the callback. """ cid = self.cnt self.observers[cid] = func self.cnt += 1 return cid
[docs] def disconnect(self, cid): """Remove the callback function with connection id *cid*.""" try: del self.observers[cid] except KeyError: pass
[docs]class Slider(AxesWidget): """ A slider representing a floating point range. Create a slider from *valmin* to *valmax* in axes *ax*. For the slider to remain responsive you must maintain a reference to it. Call :meth:`on_changed` to connect to the slider event. Attributes ---------- val : float Slider value. """ def __init__(self, ax, label, valmin, valmax, valinit=0.5, valfmt='%1.2f', closedmin=True, closedmax=True, slidermin=None, slidermax=None, dragging=True, valstep=None, orientation='horizontal', **kwargs): """ Parameters ---------- ax : Axes The Axes to put the slider in. label : str Slider label. valmin : float The minimum value of the slider. valmax : float The maximum value of the slider. valinit : float, optional, default: 0.5 The slider initial position. valfmt : str, optional, default: "%1.2f" Used to format the slider value, fprint format string. closedmin : bool, optional, default: True Whether the slider interval is closed on the bottom. closedmax : bool, optional, default: True Whether the slider interval is closed on the top. slidermin : Slider, optional, default: None Do not allow the current slider to have a value less than the value of the Slider `slidermin`. slidermax : Slider, optional, default: None Do not allow the current slider to have a value greater than the value of the Slider `slidermax`. dragging : bool, optional, default: True If True the slider can be dragged by the mouse. valstep : float, optional, default: None If given, the slider will snap to multiples of `valstep`. orientation : {'horizontal', 'vertical'}, default: 'horizontal' The orientation of the slider. Notes ----- Additional kwargs are passed on to ``self.poly`` which is the `~matplotlib.patches.Rectangle` that draws the slider knob. See the `.Rectangle` documentation for valid property names (``facecolor``, ``edgecolor``, ``alpha``, etc.). """ if ax.name == '3d': raise ValueError('Sliders cannot be added to 3D Axes') AxesWidget.__init__(self, ax) if slidermin is not None and not hasattr(slidermin, 'val'): raise ValueError("Argument slidermin ({}) has no 'val'" .format(type(slidermin))) if slidermax is not None and not hasattr(slidermax, 'val'): raise ValueError("Argument slidermax ({}) has no 'val'" .format(type(slidermax))) if orientation not in ['horizontal', 'vertical']: raise ValueError("Argument orientation ({}) must be either" "'horizontal' or 'vertical'".format(orientation)) self.orientation = orientation self.closedmin = closedmin self.closedmax = closedmax self.slidermin = slidermin self.slidermax = slidermax self.drag_active = False self.valmin = valmin self.valmax = valmax self.valstep = valstep valinit = self._value_in_bounds(valinit) if valinit is None: valinit = valmin self.val = valinit self.valinit = valinit if orientation == 'vertical': self.poly = ax.axhspan(valmin, valinit, 0, 1, **kwargs) self.hline = ax.axhline(valinit, 0, 1, color='r', lw=1) else: self.poly = ax.axvspan(valmin, valinit, 0, 1, **kwargs) self.vline = ax.axvline(valinit, 0, 1, color='r', lw=1) self.valfmt = valfmt ax.set_yticks([]) if orientation == 'vertical': ax.set_ylim((valmin, valmax)) else: ax.set_xlim((valmin, valmax)) ax.set_xticks([]) ax.set_navigate(False) self.connect_event('button_press_event', self._update) self.connect_event('button_release_event', self._update) if dragging: self.connect_event('motion_notify_event', self._update) if orientation == 'vertical': self.label = ax.text(0.5, 1.02, label, transform=ax.transAxes, verticalalignment='bottom', horizontalalignment='center') self.valtext = ax.text(0.5, -0.02, valfmt % valinit, transform=ax.transAxes, verticalalignment='top', horizontalalignment='center') else: self.label = ax.text(-0.02, 0.5, label, transform=ax.transAxes, verticalalignment='center', horizontalalignment='right') self.valtext = ax.text(1.02, 0.5, valfmt % valinit, transform=ax.transAxes, verticalalignment='center', horizontalalignment='left') self.cnt = 0 self.observers = {} self.set_val(valinit) def _value_in_bounds(self, val): """Makes sure *val* is with given bounds.""" if self.valstep: val = (self.valmin + round((val - self.valmin) / self.valstep) * self.valstep) if val <= self.valmin: if not self.closedmin: return val = self.valmin elif val >= self.valmax: if not self.closedmax: return val = self.valmax if self.slidermin is not None and val <= self.slidermin.val: if not self.closedmin: return val = self.slidermin.val if self.slidermax is not None and val >= self.slidermax.val: if not self.closedmax: return val = self.slidermax.val return val def _update(self, event): """Update the slider position.""" if self.ignore(event) or event.button != 1: return if event.name == 'button_press_event' and event.inaxes == self.ax: self.drag_active = True event.canvas.grab_mouse(self.ax) if not self.drag_active: return elif ((event.name == 'button_release_event') or (event.name == 'button_press_event' and event.inaxes != self.ax)): self.drag_active = False event.canvas.release_mouse(self.ax) return if self.orientation == 'vertical': val = self._value_in_bounds(event.ydata) else: val = self._value_in_bounds(event.xdata) if val not in [None, self.val]: self.set_val(val)
[docs] def set_val(self, val): """ Set slider value to *val* Parameters ---------- val : float """ xy = self.poly.xy if self.orientation == 'vertical': xy[1] = 0, val xy[2] = 1, val else: xy[2] = val, 1 xy[3] = val, 0 self.poly.xy = xy self.valtext.set_text(self.valfmt % val) if self.drawon: self.ax.figure.canvas.draw_idle() self.val = val if not self.eventson: return for cid, func in self.observers.items(): func(val)
[docs] def on_changed(self, func): """ When the slider value is changed call *func* with the new slider value Parameters ---------- func : callable Function to call when slider is changed. The function must accept a single float as its arguments. Returns ------- cid : int Connection id (which can be used to disconnect *func*) """ cid = self.cnt self.observers[cid] = func self.cnt += 1 return cid
[docs] def disconnect(self, cid): """ Remove the observer with connection id *cid* Parameters ---------- cid : int Connection id of the observer to be removed """ try: del self.observers[cid] except KeyError: pass
[docs] def reset(self): """Reset the slider to the initial value""" if self.val != self.valinit: self.set_val(self.valinit)
[docs]class CheckButtons(AxesWidget): r""" A GUI neutral set of check buttons. For the check buttons to remain responsive you must keep a reference to this object. Connect to the CheckButtons with the :meth:`on_clicked` method Attributes ---------- ax The `matplotlib.axes.Axes` the button are located in. labels A list of `matplotlib.text.Text`\ s. lines List of (line1, line2) tuples for the x's in the check boxes. These lines exist for each box, but have ``set_visible(False)`` when its box is not checked. rectangles A list of `matplotlib.patches.Rectangle`\ s. """ def __init__(self, ax, labels, actives=None): """ Add check buttons to `matplotlib.axes.Axes` instance *ax* Parameters ---------- ax : `~matplotlib.axes.Axes` The parent axes for the widget. labels : list of str The labels of the check buttons. actives : list of bool, optional The initial check states of the buttons. The list must have the same length as *labels*. If not given, all buttons are unchecked. """ AxesWidget.__init__(self, ax) ax.set_xticks([]) ax.set_yticks([]) ax.set_navigate(False) if actives is None: actives = [False] * len(labels) if len(labels) > 1: dy = 1. / (len(labels) + 1) ys = np.linspace(1 - dy, dy, len(labels)) else: dy = 0.25 ys = [0.5] axcolor = ax.get_facecolor() self.labels = [] self.lines = [] self.rectangles = [] lineparams = {'color': 'k', 'linewidth': 1.25, 'transform': ax.transAxes, 'solid_capstyle': 'butt'} for y, label, active in zip(ys, labels, actives): t = ax.text(0.25, y, label, transform=ax.transAxes, horizontalalignment='left', verticalalignment='center') w, h = dy / 2, dy / 2 x, y = 0.05, y - h / 2 p = Rectangle(xy=(x, y), width=w, height=h, edgecolor='black', facecolor=axcolor, transform=ax.transAxes) l1 = Line2D([x, x + w], [y + h, y], **lineparams) l2 = Line2D([x, x + w], [y, y + h], **lineparams) l1.set_visible(active) l2.set_visible(active) self.labels.append(t) self.rectangles.append(p) self.lines.append((l1, l2)) ax.add_patch(p) ax.add_line(l1) ax.add_line(l2) self.connect_event('button_press_event', self._clicked) self.cnt = 0 self.observers = {} def _clicked(self, event): if self.ignore(event) or event.button != 1 or event.inaxes != self.ax: return for i, (p, t) in enumerate(zip(self.rectangles, self.labels)): if (t.get_window_extent().contains(event.x, event.y) or p.get_window_extent().contains(event.x, event.y)): self.set_active(i) break
[docs] def set_active(self, index): """ Directly (de)activate a check button by index. *index* is an index into the original label list that this object was constructed with. Raises ValueError if *index* is invalid. Callbacks will be triggered if :attr:`eventson` is True. """ if not 0 <= index < len(self.labels): raise ValueError("Invalid CheckButton index: %d" % index) l1, l2 = self.lines[index] l1.set_visible(not l1.get_visible()) l2.set_visible(not l2.get_visible()) if self.drawon: self.ax.figure.canvas.draw() if not self.eventson: return for cid, func in self.observers.items(): func(self.labels[index].get_text())
[docs] def get_status(self): """ Return a tuple of the status (True/False) of all of the check buttons. """ return [l1.get_visible() for (l1, l2) in self.lines]
[docs] def on_clicked(self, func): """ Connect the callback function *func* to button click events. Returns a connection id, which can be used to disconnect the callback. """ cid = self.cnt self.observers[cid] = func self.cnt += 1 return cid
[docs] def disconnect(self, cid): """remove the observer with connection id *cid*""" try: del self.observers[cid] except KeyError: pass
[docs]class TextBox(AxesWidget): """ A GUI neutral text input box. For the text box to remain responsive you must keep a reference to it. Call :meth:`on_text_change` to be updated whenever the text changes. Call :meth:`on_submit` to be updated whenever the user hits enter or leaves the text entry field. Attributes ---------- ax The `matplotlib.axes.Axes` the button renders into. label A `matplotlib.text.Text` instance. color The color of the button when not hovering. hovercolor The color of the button when hovering. """ def __init__(self, ax, label, initial='', color='.95', hovercolor='1', label_pad=.01): """ Parameters ---------- ax : `~matplotlib.axes.Axes` The `~.axes.Axes` instance the button will be placed into. label : str Label for this text box. initial : str Initial value in the text box. color : color The color of the box. hovercolor : color The color of the box when the mouse is over it. label_pad : float The distance between the label and the right side of the textbox. """ AxesWidget.__init__(self, ax) self.DIST_FROM_LEFT = .05 self.params_to_disable = [key for key in rcParams if 'keymap' in key] self.text = initial self.label = ax.text(-label_pad, 0.5, label, verticalalignment='center', horizontalalignment='right', transform=ax.transAxes) self.text_disp = self._make_text_disp(self.text) self.cnt = 0 self.change_observers = {} self.submit_observers = {} # If these lines are removed, the cursor won't appear the first # time the box is clicked: self.ax.set_xlim(0, 1) self.ax.set_ylim(0, 1) self.cursor_index = 0 # Because this is initialized, _render_cursor # can assume that cursor exists. self.cursor = self.ax.vlines(0, 0, 0) self.cursor.set_visible(False) self.connect_event('button_press_event', self._click) self.connect_event('button_release_event', self._release) self.connect_event('motion_notify_event', self._motion) self.connect_event('key_press_event', self._keypress) self.connect_event('resize_event', self._resize) ax.set_navigate(False) ax.set_facecolor(color) ax.set_xticks([]) ax.set_yticks([]) self.color = color self.hovercolor = hovercolor self._lastcolor = color self.capturekeystrokes = False def _make_text_disp(self, string): return self.ax.text(self.DIST_FROM_LEFT, 0.5, string, verticalalignment='center', horizontalalignment='left', transform=self.ax.transAxes) def _rendercursor(self): # this is a hack to figure out where the cursor should go. # we draw the text up to where the cursor should go, measure # and save its dimensions, draw the real text, then put the cursor # at the saved dimensions widthtext = self.text[:self.cursor_index] no_text = False if widthtext in ["", " ", " "]: no_text = widthtext == "" widthtext = "," wt_disp = self._make_text_disp(widthtext) self.ax.figure.canvas.draw() bb = wt_disp.get_window_extent() inv = self.ax.transData.inverted() bb = inv.transform(bb) wt_disp.set_visible(False) if no_text: bb[1, 0] = bb[0, 0] # hack done self.cursor.set_visible(False) self.cursor = self.ax.vlines(bb[1, 0], bb[0, 1], bb[1, 1]) self.ax.figure.canvas.draw() def _notify_submit_observers(self): if self.eventson: for cid, func in self.submit_observers.items(): func(self.text) def _release(self, event): if self.ignore(event): return if event.canvas.mouse_grabber != self.ax: return event.canvas.release_mouse(self.ax) def _keypress(self, event): if self.ignore(event): return if self.capturekeystrokes: key = event.key if len(key) == 1: self.text = (self.text[:self.cursor_index] + key + self.text[self.cursor_index:]) self.cursor_index += 1 elif key == "right": if self.cursor_index != len(self.text): self.cursor_index += 1 elif key == "left": if self.cursor_index != 0: self.cursor_index -= 1 elif key == "home": self.cursor_index = 0 elif key == "end": self.cursor_index = len(self.text) elif key == "backspace": if self.cursor_index != 0: self.text = (self.text[:self.cursor_index - 1] + self.text[self.cursor_index:]) self.cursor_index -= 1 elif key == "delete": if self.cursor_index != len(self.text): self.text = (self.text[:self.cursor_index] + self.text[self.cursor_index + 1:]) self.text_disp.remove() self.text_disp = self._make_text_disp(self.text) self._rendercursor() self._notify_change_observers() if key == "enter": self._notify_submit_observers()
[docs] def set_val(self, val): newval = str(val) if self.text == newval: return self.text = newval self.text_disp.remove() self.text_disp = self._make_text_disp(self.text) self._rendercursor() self._notify_change_observers() self._notify_submit_observers()
def _notify_change_observers(self): if self.eventson: for cid, func in self.change_observers.items(): func(self.text)
[docs] def begin_typing(self, x): self.capturekeystrokes = True # Check for toolmanager handling the keypress if self.ax.figure.canvas.manager.key_press_handler_id is not None: # disable command keys so that the user can type without # command keys causing figure to be saved, etc self.reset_params = {} for key in self.params_to_disable: self.reset_params[key] = rcParams[key] rcParams[key] = [] else: self.ax.figure.canvas.manager.toolmanager.keypresslock(self)
[docs] def stop_typing(self): notifysubmit = False # Because _notify_submit_users might throw an error in the user's code, # we only want to call it once we've already done our cleanup. if self.capturekeystrokes: # Check for toolmanager handling the keypress if self.ax.figure.canvas.manager.key_press_handler_id is not None: # since the user is no longer typing, # reactivate the standard command keys for key in self.params_to_disable: rcParams[key] = self.reset_params[key] else: toolmanager = self.ax.figure.canvas.manager.toolmanager toolmanager.keypresslock.release(self) notifysubmit = True self.capturekeystrokes = False self.cursor.set_visible(False) self.ax.figure.canvas.draw() if notifysubmit: self._notify_submit_observers()
[docs] def position_cursor(self, x): # now, we have to figure out where the cursor goes. # approximate it based on assuming all characters the same length if len(self.text) == 0: self.cursor_index = 0 else: bb = self.text_disp.get_window_extent() trans = self.ax.transData inv = self.ax.transData.inverted() bb = trans.transform(inv.transform(bb)) text_start = bb[0, 0] text_end = bb[1, 0] ratio = (x - text_start) / (text_end - text_start) if ratio < 0: ratio = 0 if ratio > 1: ratio = 1 self.cursor_index = int(len(self.text) * ratio) self._rendercursor()
def _click(self, event): if self.ignore(event): return if event.inaxes != self.ax: self.stop_typing() return if not self.eventson: return if event.canvas.mouse_grabber != self.ax: event.canvas.grab_mouse(self.ax) if not self.capturekeystrokes: self.begin_typing(event.x) self.position_cursor(event.x) def _resize(self, event): self.stop_typing() def _motion(self, event): if self.ignore(event): return if event.inaxes == self.ax: c = self.hovercolor else: c = self.color if c != self._lastcolor: self.ax.set_facecolor(c) self._lastcolor = c if self.drawon: self.ax.figure.canvas.draw()
[docs] def on_text_change(self, func): """ When the text changes, call this *func* with event. A connection id is returned which can be used to disconnect. """ cid = self.cnt self.change_observers[cid] = func self.cnt += 1 return cid
[docs] def on_submit(self, func): """ When the user hits enter or leaves the submission box, call this *func* with event. A connection id is returned which can be used to disconnect. """ cid = self.cnt self.submit_observers[cid] = func self.cnt += 1 return cid
[docs] def disconnect(self, cid): """Remove the observer with connection id *cid*.""" for reg in [self.change_observers, self.submit_observers]: try: del reg[cid] except KeyError: pass
[docs]class RadioButtons(AxesWidget): """ A GUI neutral radio button. For the buttons to remain responsive you must keep a reference to this object. Connect to the RadioButtons with the :meth:`on_clicked` method. Attributes ---------- ax The containing `~.axes.Axes` instance. activecolor The color of the selected button. labels A list of `~.text.Text` instances containing the button labels. circles A list of `~.patches.Circle` instances defining the buttons. value_selected : str The label text of the currently selected button. """ def __init__(self, ax, labels, active=0, activecolor='blue'): """ Add radio buttons to an `~.axes.Axes`. Parameters ---------- ax : `~matplotlib.axes.Axes` The axes to add the buttons to. labels : list of str The button labels. active : int The index of the initially selected button. activecolor : color The color of the selected button. """ AxesWidget.__init__(self, ax) self.activecolor = activecolor self.value_selected = None ax.set_xticks([]) ax.set_yticks([]) ax.set_navigate(False) dy = 1. / (len(labels) + 1) ys = np.linspace(1 - dy, dy, len(labels)) cnt = 0 axcolor = ax.get_facecolor() # scale the radius of the circle with the spacing between each one circle_radius = dy / 2 - 0.01 # default to hard-coded value if the radius becomes too large circle_radius = min(circle_radius, 0.05) self.labels = [] self.circles = [] for y, label in zip(ys, labels): t = ax.text(0.25, y, label, transform=ax.transAxes, horizontalalignment='left', verticalalignment='center') if cnt == active: self.value_selected = label facecolor = activecolor else: facecolor = axcolor p = Circle(xy=(0.15, y), radius=circle_radius, edgecolor='black', facecolor=facecolor, transform=ax.transAxes) self.labels.append(t) self.circles.append(p) ax.add_patch(p) cnt += 1 self.connect_event('button_press_event', self._clicked) self.cnt = 0 self.observers = {} def _clicked(self, event): if self.ignore(event) or event.button != 1 or event.inaxes != self.ax: return pclicked = self.ax.transAxes.inverted().transform((event.x, event.y)) distances = {} for i, (p, t) in enumerate(zip(self.circles, self.labels)): if (t.get_window_extent().contains(event.x, event.y) or np.linalg.norm(pclicked - p.center) < p.radius): distances[i] = np.linalg.norm(pclicked - p.center) if len(distances) > 0: closest = min(distances, key=distances.get) self.set_active(closest)
[docs] def set_active(self, index): """ Select button with number *index*. Callbacks will be triggered if :attr:`eventson` is True. """ if 0 > index >= len(self.labels): raise ValueError("Invalid RadioButton index: %d" % index) self.value_selected = self.labels[index].get_text() for i, p in enumerate(self.circles): if i == index: color = self.activecolor else: color = self.ax.get_facecolor() p.set_facecolor(color) if self.drawon: self.ax.figure.canvas.draw() if not self.eventson: return for cid, func in self.observers.items(): func(self.labels[index].get_text())
[docs] def on_clicked(self, func): """ Connect the callback function *func* to button click events. Returns a connection id, which can be used to disconnect the callback. """ cid = self.cnt self.observers[cid] = func self.cnt += 1 return cid
[docs] def disconnect(self, cid): """Remove the observer with connection id *cid*.""" try: del self.observers[cid] except KeyError: pass
[docs]class SubplotTool(Widget): """ A tool to adjust the subplot params of a `matplotlib.figure.Figure`. """ def __init__(self, targetfig, toolfig): """ Parameters ---------- targetfig : `.Figure` The figure instance to adjust. toolfig : `.Figure` The figure instance to embed the subplot tool into. """ self.targetfig = targetfig toolfig.subplots_adjust(left=0.2, right=0.9) self.axleft = toolfig.add_subplot(711) self.axleft.set_title('Click on slider to adjust subplot param') self.axleft.set_navigate(False) self.sliderleft = Slider(self.axleft, 'left', 0, 1, targetfig.subplotpars.left, closedmax=False) self.sliderleft.on_changed(self.funcleft) self.axbottom = toolfig.add_subplot(712) self.axbottom.set_navigate(False) self.sliderbottom = Slider(self.axbottom, 'bottom', 0, 1, targetfig.subplotpars.bottom, closedmax=False) self.sliderbottom.on_changed(self.funcbottom) self.axright = toolfig.add_subplot(713) self.axright.set_navigate(False) self.sliderright = Slider(self.axright, 'right', 0, 1, targetfig.subplotpars.right, closedmin=False) self.sliderright.on_changed(self.funcright) self.axtop = toolfig.add_subplot(714) self.axtop.set_navigate(False) self.slidertop = Slider(self.axtop, 'top', 0, 1, targetfig.subplotpars.top, closedmin=False) self.slidertop.on_changed(self.functop) self.axwspace = toolfig.add_subplot(715) self.axwspace.set_navigate(False) self.sliderwspace = Slider(self.axwspace, 'wspace', 0, 1, targetfig.subplotpars.wspace, closedmax=False) self.sliderwspace.on_changed(self.funcwspace) self.axhspace = toolfig.add_subplot(716) self.axhspace.set_navigate(False) self.sliderhspace = Slider(self.axhspace, 'hspace', 0, 1, targetfig.subplotpars.hspace, closedmax=False) self.sliderhspace.on_changed(self.funchspace) # constraints self.sliderleft.slidermax = self.sliderright self.sliderright.slidermin = self.sliderleft self.sliderbottom.slidermax = self.slidertop self.slidertop.slidermin = self.sliderbottom bax = toolfig.add_axes([0.8, 0.05, 0.15, 0.075]) self.buttonreset = Button(bax, 'Reset') sliders = (self.sliderleft, self.sliderbottom, self.sliderright, self.slidertop, self.sliderwspace, self.sliderhspace,) def func(event): with ExitStack() as stack: # Temporarily disable drawing on self and self's sliders. stack.enter_context(cbook._setattr_cm(self, drawon=False)) for slider in sliders: stack.enter_context( cbook._setattr_cm(slider, drawon=False)) # Reset the slider to the initial position. for slider in sliders: slider.reset() # Draw the canvas. if self.drawon: toolfig.canvas.draw() self.targetfig.canvas.draw() # during reset there can be a temporary invalid state # depending on the order of the reset so we turn off # validation for the resetting validate = toolfig.subplotpars.validate toolfig.subplotpars.validate = False self.buttonreset.on_clicked(func) toolfig.subplotpars.validate = validate
[docs] def funcleft(self, val): self.targetfig.subplots_adjust(left=val) if self.drawon: self.targetfig.canvas.draw()
[docs] def funcright(self, val): self.targetfig.subplots_adjust(right=val) if self.drawon: self.targetfig.canvas.draw()
[docs] def funcbottom(self, val): self.targetfig.subplots_adjust(bottom=val) if self.drawon: self.targetfig.canvas.draw()
[docs] def functop(self, val): self.targetfig.subplots_adjust(top=val) if self.drawon: self.targetfig.canvas.draw()
[docs] def funcwspace(self, val): self.targetfig.subplots_adjust(wspace=val) if self.drawon: self.targetfig.canvas.draw()
[docs] def funchspace(self, val): self.targetfig.subplots_adjust(hspace=val) if self.drawon: self.targetfig.canvas.draw()
[docs]class Cursor(AxesWidget): """ A crosshair cursor that spans the axes and moves with mouse cursor. For the cursor to remain responsive you must keep a reference to it. Parameters ---------- ax : `matplotlib.axes.Axes` The `~.axes.Axes` to attach the cursor to. horizOn : bool, optional, default: True Whether to draw the horizontal line. vertOn : bool, optional, default: True Whether to draw the vertical line. useblit : bool, optional, default: False Use blitting for faster drawing if supported by the backend. Other Parameters ---------------- **lineprops `.Line2D` properties that control the appearance of the lines. See also `~.Axes.axhline`. Examples -------- See :doc:`/gallery/widgets/cursor`. """ def __init__(self, ax, horizOn=True, vertOn=True, useblit=False, **lineprops): AxesWidget.__init__(self, ax) self.connect_event('motion_notify_event', self.onmove) self.connect_event('draw_event', self.clear) self.visible = True self.horizOn = horizOn self.vertOn = vertOn self.useblit = useblit and self.canvas.supports_blit if self.useblit: lineprops['animated'] = True self.lineh = ax.axhline(ax.get_ybound()[0], visible=False, **lineprops) self.linev = ax.axvline(ax.get_xbound()[0], visible=False, **lineprops) self.background = None self.needclear = False
[docs] def clear(self, event): """Internal event handler to clear the cursor.""" if self.ignore(event): return if self.useblit: self.background = self.canvas.copy_from_bbox(self.ax.bbox) self.linev.set_visible(False) self.lineh.set_visible(False)
[docs] def onmove(self, event): """Internal event handler to draw the cursor when the mouse moves.""" if self.ignore(event): return if not self.canvas.widgetlock.available(self): return if event.inaxes != self.ax: self.linev.set_visible(False) self.lineh.set_visible(False) if self.needclear: self.canvas.draw() self.needclear = False return self.needclear = True if not self.visible: return self.linev.set_xdata((event.xdata, event.xdata)) self.lineh.set_ydata((event.ydata, event.ydata)) self.linev.set_visible(self.visible and self.vertOn) self.lineh.set_visible(self.visible and self.horizOn) self._update()
def _update(self): if self.useblit: if self.background is not None: self.canvas.restore_region(self.background) self.ax.draw_artist(self.linev) self.ax.draw_artist(self.lineh) self.canvas.blit(self.ax.bbox) else: self.canvas.draw_idle() return False
[docs]class MultiCursor(Widget): """ Provide a vertical (default) and/or horizontal line cursor shared between multiple axes. For the cursor to remain responsive you must keep a reference to it. Example usage:: from matplotlib.widgets import MultiCursor import matplotlib.pyplot as plt import numpy as np fig, (ax1, ax2) = plt.subplots(nrows=2, sharex=True) t = np.arange(0.0, 2.0, 0.01) ax1.plot(t, np.sin(2*np.pi*t)) ax2.plot(t, np.sin(4*np.pi*t)) multi = MultiCursor(fig.canvas, (ax1, ax2), color='r', lw=1, horizOn=False, vertOn=True) plt.show() """ def __init__(self, canvas, axes, useblit=True, horizOn=False, vertOn=True, **lineprops): self.canvas = canvas self.axes = axes self.horizOn = horizOn self.vertOn = vertOn xmin, xmax = axes[-1].get_xlim() ymin, ymax = axes[-1].get_ylim() xmid = 0.5 * (xmin + xmax) ymid = 0.5 * (ymin + ymax) self.visible = True self.useblit = useblit and self.canvas.supports_blit self.background = None self.needclear = False if self.useblit: lineprops['animated'] = True if vertOn: self.vlines = [ax.axvline(xmid, visible=False, **lineprops) for ax in axes] else: self.vlines = [] if horizOn: self.hlines = [ax.axhline(ymid, visible=False, **lineprops) for ax in axes] else: self.hlines = [] self.connect()
[docs] def connect(self): """connect events""" self._cidmotion = self.canvas.mpl_connect('motion_notify_event', self.onmove) self._ciddraw = self.canvas.mpl_connect('draw_event', self.clear)
[docs] def disconnect(self): """disconnect events""" self.canvas.mpl_disconnect(self._cidmotion) self.canvas.mpl_disconnect(self._ciddraw)
[docs] def clear(self, event): """clear the cursor""" if self.ignore(event): return if self.useblit: self.background = ( self.canvas.copy_from_bbox(self.canvas.figure.bbox)) for line in self.vlines + self.hlines: line.set_visible(False)
[docs] def onmove(self, event): if self.ignore(event): return if event.inaxes is None: return if not self.canvas.widgetlock.available(self): return self.needclear = True if not self.visible: return if self.vertOn: for line in self.vlines: line.set_xdata((event.xdata, event.xdata)) line.set_visible(self.visible) if self.horizOn: for line in self.hlines: line.set_ydata((event.ydata, event.ydata)) line.set_visible(self.visible) self._update()
def _update(self): if self.useblit: if self.background is not None: self.canvas.restore_region(self.background) if self.vertOn: for ax, line in zip(self.axes, self.vlines): ax.draw_artist(line) if self.horizOn: for ax, line in zip(self.axes, self.hlines): ax.draw_artist(line) self.canvas.blit() else: self.canvas.draw_idle()
class _SelectorWidget(AxesWidget): def __init__(self, ax, onselect, useblit=False, button=None, state_modifier_keys=None): AxesWidget.__init__(self, ax) self.visible = True self.onselect = onselect self.useblit = useblit and self.canvas.supports_blit self.connect_default_events() self.state_modifier_keys = dict(move=' ', clear='escape', square='shift', center='control') self.state_modifier_keys.update(state_modifier_keys or {}) self.background = None self.artists = [] if isinstance(button, Integral): self.validButtons = [button] else: self.validButtons = button # will save the data (position at mouseclick) self.eventpress = None # will save the data (pos. at mouserelease) self.eventrelease = None self._prev_event = None self.state = set() def set_active(self, active): AxesWidget.set_active(self, active) if active: self.update_background(None) def update_background(self, event): """force an update of the background""" # If you add a call to `ignore` here, you'll want to check edge case: # `release` can call a draw event even when `ignore` is True. if self.useblit: self.background = self.canvas.copy_from_bbox(self.ax.bbox) def connect_default_events(self): """Connect the major canvas events to methods.""" self.connect_event('motion_notify_event', self.onmove) self.connect_event('button_press_event', self.press) self.connect_event('button_release_event', self.release) self.connect_event('draw_event', self.update_background) self.connect_event('key_press_event', self.on_key_press) self.connect_event('key_release_event', self.on_key_release) self.connect_event('scroll_event', self.on_scroll) def ignore(self, event): # docstring inherited if not self.active or not self.ax.get_visible(): return True # If canvas was locked if not self.canvas.widgetlock.available(self): return True if not hasattr(event, 'button'): event.button = None # Only do rectangle selection if event was triggered # with a desired button if (self.validButtons is not None and event.button not in self.validButtons): return True # If no button was pressed yet ignore the event if it was out # of the axes if self.eventpress is None: return event.inaxes != self.ax # If a button was pressed, check if the release-button is the same. if event.button == self.eventpress.button: return False # If a button was pressed, check if the release-button is the same. return (event.inaxes != self.ax or event.button != self.eventpress.button) def update(self): """ Draw using blit() or draw_idle() depending on ``self.useblit``. """ if not self.ax.get_visible(): return False if self.useblit: if self.background is not None: self.canvas.restore_region(self.background) for artist in self.artists: self.ax.draw_artist(artist) self.canvas.blit(self.ax.bbox) else: self.canvas.draw_idle() return False def _get_data(self, event): """Get the xdata and ydata for event, with limits""" if event.xdata is None: return None, None x0, x1 = self.ax.get_xbound() y0, y1 = self.ax.get_ybound() xdata = max(x0, event.xdata) xdata = min(x1, xdata) ydata = max(y0, event.ydata) ydata = min(y1, ydata) return xdata, ydata def _clean_event(self, event): """Clean up an event Use prev event if there is no xdata Limit the xdata and ydata to the axes limits Set the prev event """ if event.xdata is None: event = self._prev_event else: event = copy.copy(event) event.xdata, event.ydata = self._get_data(event) self._prev_event = event return event def press(self, event): """Button press handler and validator""" if not self.ignore(event): event = self._clean_event(event) self.eventpress = event self._prev_event = event key = event.key or '' key = key.replace('ctrl', 'control') # move state is locked in on a button press if key == self.state_modifier_keys['move']: self.state.add('move') self._press(event) return True return False def _press(self, event): """Button press handler""" def release(self, event): """Button release event handler and validator""" if not self.ignore(event) and self.eventpress: event = self._clean_event(event) self.eventrelease = event self._release(event) self.eventpress = None self.eventrelease = None self.state.discard('move') return True return False def _release(self, event): """Button release event handler""" def onmove(self, event): """Cursor move event handler and validator""" if not self.ignore(event) and self.eventpress: event = self._clean_event(event) self._onmove(event) return True return False def _onmove(self, event): """Cursor move event handler""" def on_scroll(self, event): """Mouse scroll event handler and validator""" if not self.ignore(event): self._on_scroll(event) def _on_scroll(self, event): """Mouse scroll event handler""" def on_key_press(self, event): """Key press event handler and validator for all selection widgets""" if self.active: key = event.key or '' key = key.replace('ctrl', 'control') if key == self.state_modifier_keys['clear']: for artist in self.artists: artist.set_visible(False) self.update() return for (state, modifier) in self.state_modifier_keys.items(): if modifier in key: self.state.add(state) self._on_key_press(event) def _on_key_press(self, event): """Key press event handler - use for widget-specific key press actions. """ def on_key_release(self, event): """Key release event handler and validator.""" if self.active: key = event.key or '' for (state, modifier) in self.state_modifier_keys.items(): if modifier in key: self.state.discard(state) self._on_key_release(event) def _on_key_release(self, event): """Key release event handler.""" def set_visible(self, visible): """Set the visibility of our artists.""" self.visible = visible for artist in self.artists: artist.set_visible(visible)
[docs]class SpanSelector(_SelectorWidget): """ Visually select a min/max range on a single axis and call a function with those values. To guarantee that the selector remains responsive, keep a reference to it. In order to turn off the SpanSelector, set `span_selector.active=False`. To turn it back on, set `span_selector.active=True`. Parameters ---------- ax : `matplotlib.axes.Axes` object onselect : func(min, max), min/max are floats direction : {"horizontal", "vertical"} The direction along which to draw the span selector. minspan : float, default is None If selection is less than *minspan*, do not call *onselect*. useblit : bool, default is False If True, use the backend-dependent blitting features for faster canvas updates. rectprops : dict, default is None Dictionary of `matplotlib.patches.Patch` properties. onmove_callback : func(min, max), min/max are floats, default is None Called on mouse move while the span is being selected. span_stays : bool, default is False If True, the span stays visible after the mouse is released. button : `.MouseButton` or list of `.MouseButton` The mouse buttons which activate the span selector. Examples -------- >>> import matplotlib.pyplot as plt >>> import matplotlib.widgets as mwidgets >>> fig, ax = plt.subplots() >>> ax.plot([1, 2, 3], [10, 50, 100]) >>> def onselect(vmin, vmax): ... print(vmin, vmax) >>> rectprops = dict(facecolor='blue', alpha=0.5) >>> span = mwidgets.SpanSelector(ax, onselect, 'horizontal', ... rectprops=rectprops) >>> fig.show() See also: :doc:`/gallery/widgets/span_selector` """ def __init__(self, ax, onselect, direction, minspan=None, useblit=False, rectprops=None, onmove_callback=None, span_stays=False, button=None): _SelectorWidget.__init__(self, ax, onselect, useblit=useblit, button=button) if rectprops is None: rectprops = dict(facecolor='red', alpha=0.5) rectprops['animated'] = self.useblit cbook._check_in_list(['horizontal', 'vertical'], direction=direction) self.direction = direction self.rect = None self.pressv = None self.rectprops = rectprops self.onmove_callback = onmove_callback self.minspan = minspan self.span_stays = span_stays # Needed when dragging out of axes self.prev = (0, 0) # Reset canvas so that `new_axes` connects events. self.canvas = None self.new_axes(ax)
[docs] def new_axes(self, ax): """Set SpanSelector to operate on a new Axes.""" self.ax = ax if self.canvas is not ax.figure.canvas: if self.canvas is not None: self.disconnect_events() self.canvas = ax.figure.canvas self.connect_default_events() if self.direction == 'horizontal': trans = blended_transform_factory(self.ax.transData, self.ax.transAxes) w, h = 0, 1 else: trans = blended_transform_factory(self.ax.transAxes, self.ax.transData) w, h = 1, 0 self.rect = Rectangle((0, 0), w, h, transform=trans, visible=False, **self.rectprops) if self.span_stays: self.stay_rect = Rectangle((0, 0), w, h, transform=trans, visible=False, **self.rectprops) self.stay_rect.set_animated(False) self.ax.add_patch(self.stay_rect) self.ax.add_patch(self.rect) self.artists = [self.rect]
[docs] def ignore(self, event): # docstring inherited return _SelectorWidget.ignore(self, event) or not self.visible
def _press(self, event): """on button press event""" self.rect.set_visible(self.visible) if self.span_stays: self.stay_rect.set_visible(False) # really force a draw so that the stay rect is not in # the blit background if self.useblit: self.canvas.draw() xdata, ydata = self._get_data(event) if self.direction == 'horizontal': self.pressv = xdata else: self.pressv = ydata self._set_span_xy(event) return False def _release(self, event): """on button release event""" if self.pressv is None: return self.rect.set_visible(False) if self.span_stays: self.stay_rect.set_x(self.rect.get_x()) self.stay_rect.set_y(self.rect.get_y()) self.stay_rect.set_width(self.rect.get_width()) self.stay_rect.set_height(self.rect.get_height()) self.stay_rect.set_visible(True) self.canvas.draw_idle() vmin = self.pressv xdata, ydata = self._get_data(event) if self.direction == 'horizontal': vmax = xdata or self.prev[0] else: vmax = ydata or self.prev[1] if vmin > vmax: vmin, vmax = vmax, vmin span = vmax - vmin if self.minspan is not None and span < self.minspan: return self.onselect(vmin, vmax) self.pressv = None return False @cbook.deprecated("3.1") @property def buttonDown(self): return False def _onmove(self, event): """on motion notify event""" if self.pressv is None: return self._set_span_xy(event) if self.onmove_callback is not None: vmin = self.pressv xdata, ydata = self._get_data(event) if self.direction == 'horizontal': vmax = xdata or self.prev[0] else: vmax = ydata or self.prev[1] if vmin > vmax: vmin, vmax = vmax, vmin self.onmove_callback(vmin, vmax) self.update() return False def _set_span_xy(self, event): """Setting the span coordinates""" x, y = self._get_data(event) if x is None: return self.prev = x, y if self.direction == 'horizontal': v = x else: v = y minv, maxv = v, self.pressv if minv > maxv: minv, maxv = maxv, minv if self.direction == 'horizontal': self.rect.set_x(minv) self.rect.set_width(maxv - minv) else: self.rect.set_y(minv) self.rect.set_height(maxv - minv)
[docs]class ToolHandles: """ Control handles for canvas tools. Parameters ---------- ax : `matplotlib.axes.Axes` Matplotlib axes where tool handles are displayed. x, y : 1D arrays Coordinates of control handles. marker : str Shape of marker used to display handle. See `matplotlib.pyplot.plot`. marker_props : dict Additional marker properties. See `matplotlib.lines.Line2D`. """ def __init__(self, ax, x, y, marker='o', marker_props=None, useblit=True): self.ax = ax props = dict(marker=marker, markersize=7, mfc='w', ls='none', alpha=0.5, visible=False, label='_nolegend_') props.update(marker_props if marker_props is not None else {}) self._markers = Line2D(x, y, animated=useblit, **props) self.ax.add_line(self._markers) self.artist = self._markers @property def x(self): return self._markers.get_xdata() @property def y(self): return self._markers.get_ydata()
[docs] def set_data(self, pts, y=None): """Set x and y positions of handles""" if y is not None: x = pts pts = np.array([x, y]) self._markers.set_data(pts)
[docs] def set_visible(self, val): self._markers.set_visible(val)
[docs] def set_animated(self, val): self._markers.set_animated(val)
[docs] def closest(self, x, y): """Return index and pixel distance to closest index.""" pts = np.column_stack([self.x, self.y]) # Transform data coordinates to pixel coordinates. pts = self.ax.transData.transform(pts) diff = pts - [x, y] dist = np.hypot(*diff.T) min_index = np.argmin(dist) return min_index, dist[min_index]
[docs]class RectangleSelector(_SelectorWidget): """ Select a rectangular region of an axes. For the cursor to remain responsive you must keep a reference to it. Example usage:: import numpy as np import matplotlib.pyplot as plt from matplotlib.widgets import RectangleSelector def onselect(eclick, erelease): "eclick and erelease are matplotlib events at press and release." print('startposition: (%f, %f)' % (eclick.xdata, eclick.ydata)) print('endposition : (%f, %f)' % (erelease.xdata, erelease.ydata)) print('used button : ', eclick.button) def toggle_selector(event): print('Key pressed.') if event.key in ['Q', 'q'] and toggle_selector.RS.active: print('RectangleSelector deactivated.') toggle_selector.RS.set_active(False) if event.key in ['A', 'a'] and not toggle_selector.RS.active: print('RectangleSelector activated.') toggle_selector.RS.set_active(True) x = np.arange(100.) / 99 y = np.sin(x) fig, ax = plt.subplots() ax.plot(x, y) toggle_selector.RS = RectangleSelector(ax, onselect, drawtype='line') fig.canvas.mpl_connect('key_press_event', toggle_selector) plt.show() """ _shape_klass = Rectangle def __init__(self, ax, onselect, drawtype='box', minspanx=None, minspany=None, useblit=False, lineprops=None, rectprops=None, spancoords='data', button=None, maxdist=10, marker_props=None, interactive=False, state_modifier_keys=None): """ Create a selector in *ax*. When a selection is made, clear the span and call onselect with:: onselect(pos_1, pos_2) and clear the drawn box/line. The ``pos_1`` and ``pos_2`` are arrays of length 2 containing the x- and y-coordinate. If *minspanx* is not *None* then events smaller than *minspanx* in x direction are ignored (it's the same for y). The rectangle is drawn with *rectprops*; default:: rectprops = dict(facecolor='red', edgecolor = 'black', alpha=0.2, fill=True) The line is drawn with *lineprops*; default:: lineprops = dict(color='black', linestyle='-', linewidth = 2, alpha=0.5) Use *drawtype* if you want the mouse to draw a line, a box or nothing between click and actual position by setting ``drawtype = 'line'``, ``drawtype='box'`` or ``drawtype = 'none'``. Drawing a line would result in a line from vertex A to vertex C in a rectangle ABCD. *spancoords* is one of 'data' or 'pixels'. If 'data', *minspanx* and *minspanx* will be interpreted in the same coordinates as the x and y axis. If 'pixels', they are in pixels. *button* is a list of integers indicating which mouse buttons should be used for rectangle selection. You can also specify a single integer if only a single button is desired. Default is *None*, which does not limit which button can be used. Note, typically: 1 = left mouse button 2 = center mouse button (scroll wheel) 3 = right mouse button *interactive* will draw a set of handles and allow you interact with the widget after it is drawn. *state_modifier_keys* are keyboard modifiers that affect the behavior of the widget. The defaults are: dict(move=' ', clear='escape', square='shift', center='ctrl') Keyboard modifiers, which: 'move': Move the existing shape. 'clear': Clear the current shape. 'square': Makes the shape square. 'center': Make the initial point the center of the shape. 'square' and 'center' can be combined. """ _SelectorWidget.__init__(self, ax, onselect, useblit=useblit, button=button, state_modifier_keys=state_modifier_keys) self.to_draw = None self.visible = True self.interactive = interactive if drawtype == 'none': # draw a line but make it invisible drawtype = 'line' self.visible = False if drawtype == 'box': if rectprops is None: rectprops = dict(facecolor='red', edgecolor='black', alpha=0.2, fill=True) rectprops['animated'] = self.useblit self.rectprops = rectprops self.to_draw = self._shape_klass((0, 0), 0, 1, visible=False, **self.rectprops) self.ax.add_patch(self.to_draw) if drawtype == 'line': if lineprops is None: lineprops = dict(color='black', linestyle='-', linewidth=2, alpha=0.5) lineprops['animated'] = self.useblit self.lineprops = lineprops self.to_draw = Line2D([0, 0], [0, 0], visible=False, **self.lineprops) self.ax.add_line(self.to_draw) self.minspanx = minspanx self.minspany = minspany cbook._check_in_list(['data', 'pixels'], spancoords=spancoords) self.spancoords = spancoords self.drawtype = drawtype self.maxdist = maxdist if rectprops is None: props = dict(mec='r') else: props = dict(mec=rectprops.get('edgecolor', 'r')) self._corner_order = ['NW', 'NE', 'SE', 'SW'] xc, yc = self.corners self._corner_handles = ToolHandles(self.ax, xc, yc, marker_props=props, useblit=self.useblit) self._edge_order = ['W', 'N', 'E', 'S'] xe, ye = self.edge_centers self._edge_handles = ToolHandles(self.ax, xe, ye, marker='s', marker_props=props, useblit=self.useblit) xc, yc = self.center self._center_handle = ToolHandles(self.ax, [xc], [yc], marker='s', marker_props=props, useblit=self.useblit) self.active_handle = None self.artists = [self.to_draw, self._center_handle.artist, self._corner_handles.artist, self._edge_handles.artist] if not self.interactive: self.artists = [self.to_draw] self._extents_on_press = None def _press(self, event): """on button press event""" # make the drawed box/line visible get the click-coordinates, # button, ... if self.interactive and self.to_draw.get_visible(): self._set_active_handle(event) else: self.active_handle = None if self.active_handle is None or not self.interactive: # Clear previous rectangle before drawing new rectangle. self.update() if not self.interactive: x = event.xdata y = event.ydata self.extents = x, x, y, y self.set_visible(self.visible) def _release(self, event): """on button release event""" if not self.interactive: self.to_draw.set_visible(False) # update the eventpress and eventrelease with the resulting extents x1, x2, y1, y2 = self.extents self.eventpress.xdata = x1 self.eventpress.ydata = y1 xy1 = self.ax.transData.transform([x1, y1]) self.eventpress.x, self.eventpress.y = xy1 self.eventrelease.xdata = x2 self.eventrelease.ydata = y2 xy2 = self.ax.transData.transform([x2, y2]) self.eventrelease.x, self.eventrelease.y = xy2 if self.spancoords == 'data': xmin, ymin = self.eventpress.xdata, self.eventpress.ydata xmax, ymax = self.eventrelease.xdata, self.eventrelease.ydata # calculate dimensions of box or line get values in the right order elif self.spancoords == 'pixels': xmin, ymin = self.eventpress.x, self.eventpress.y xmax, ymax = self.eventrelease.x, self.eventrelease.y else: cbook._check_in_list(['data', 'pixels'], spancoords=self.spancoords) if xmin > xmax: xmin, xmax = xmax, xmin if ymin > ymax: ymin, ymax = ymax, ymin spanx = xmax - xmin spany = ymax - ymin xproblems = self.minspanx is not None and spanx < self.minspanx yproblems = self.minspany is not None and spany < self.minspany # check if drawn distance (if it exists) is not too small in # either x or y-direction if self.drawtype != 'none' and (xproblems or yproblems): for artist in self.artists: artist.set_visible(False) self.update() return # call desired function self.onselect(self.eventpress, self.eventrelease) self.update() return False def _onmove(self, event): """on motion notify event if box/line is wanted""" # resize an existing shape if self.active_handle and self.active_handle != 'C': x1, x2, y1, y2 = self._extents_on_press if self.active_handle in ['E', 'W'] + self._corner_order: x2 = event.xdata if self.active_handle in ['N', 'S'] + self._corner_order: y2 = event.ydata # move existing shape elif (('move' in self.state or self.active_handle == 'C') and self._extents_on_press is not None): x1, x2, y1, y2 = self._extents_on_press dx = event.xdata - self.eventpress.xdata dy = event.ydata - self.eventpress.ydata x1 += dx x2 += dx y1 += dy y2 += dy # new shape else: center = [self.eventpress.xdata, self.eventpress.ydata] center_pix = [self.eventpress.x, self.eventpress.y] dx = (event.xdata - center[0]) / 2. dy = (event.ydata - center[1]) / 2. # square shape if 'square' in self.state: dx_pix = abs(event.x - center_pix[0]) dy_pix = abs(event.y - center_pix[1]) if not dx_pix: return maxd = max(abs(dx_pix), abs(dy_pix)) if abs(dx_pix) < maxd: dx *= maxd / (abs(dx_pix) + 1e-6) if abs(dy_pix) < maxd: dy *= maxd / (abs(dy_pix) + 1e-6) # from center if 'center' in self.state: dx *= 2 dy *= 2 # from corner else: center[0] += dx center[1] += dy x1, x2, y1, y2 = (center[0] - dx, center[0] + dx, center[1] - dy, center[1] + dy) self.extents = x1, x2, y1, y2 @property def _rect_bbox(self): if self.drawtype == 'box': x0 = self.to_draw.get_x() y0 = self.to_draw.get_y() width = self.to_draw.get_width() height = self.to_draw.get_height() return x0, y0, width, height else: x, y = self.to_draw.get_data() x0, x1 = min(x), max(x) y0, y1 = min(y), max(y) return x0, y0, x1 - x0, y1 - y0 @property def corners(self): """Corners of rectangle from lower left, moving clockwise.""" x0, y0, width, height = self._rect_bbox xc = x0, x0 + width, x0 + width, x0 yc = y0, y0, y0 + height, y0 + height return xc, yc @property def edge_centers(self): """Midpoint of rectangle edges from left, moving clockwise.""" x0, y0, width, height = self._rect_bbox w = width / 2. h = height / 2. xe = x0, x0 + w, x0 + width, x0 + w ye = y0 + h, y0, y0 + h, y0 + height return xe, ye @property def center(self): """Center of rectangle""" x0, y0, width, height = self._rect_bbox return x0 + width / 2., y0 + height / 2. @property def extents(self): """Return (xmin, xmax, ymin, ymax).""" x0, y0, width, height = self._rect_bbox xmin, xmax = sorted([x0, x0 + width]) ymin, ymax = sorted([y0, y0 + height]) return xmin, xmax, ymin, ymax @extents.setter def extents(self, extents): # Update displayed shape self.draw_shape(extents) # Update displayed handles self._corner_handles.set_data(*self.corners) self._edge_handles.set_data(*self.edge_centers) self._center_handle.set_data(*self.center) self.set_visible(self.visible) self.update()
[docs] def draw_shape(self, extents): x0, x1, y0, y1 = extents xmin, xmax = sorted([x0, x1]) ymin, ymax = sorted([y0, y1]) xlim = sorted(self.ax.get_xlim()) ylim = sorted(self.ax.get_ylim()) xmin = max(xlim[0], xmin) ymin = max(ylim[0], ymin) xmax = min(xmax, xlim[1]) ymax = min(ymax, ylim[1]) if self.drawtype == 'box': self.to_draw.set_x(xmin) self.to_draw.set_y(ymin) self.to_draw.set_width(xmax - xmin) self.to_draw.set_height(ymax - ymin) elif self.drawtype == 'line': self.to_draw.set_data([xmin, xmax], [ymin, ymax])
def _set_active_handle(self, event): """Set active handle based on the location of the mouse event""" # Note: event.xdata/ydata in data coordinates, event.x/y in pixels c_idx, c_dist = self._corner_handles.closest(event.x, event.y) e_idx, e_dist = self._edge_handles.closest(event.x, event.y) m_idx, m_dist = self._center_handle.closest(event.x, event.y) if 'move' in self.state: self.active_handle = 'C' self._extents_on_press = self.extents # Set active handle as closest handle, if mouse click is close enough. elif m_dist < self.maxdist * 2: self.active_handle = 'C' elif c_dist > self.maxdist and e_dist > self.maxdist: self.active_handle = None return elif c_dist < e_dist: self.active_handle = self._corner_order[c_idx] else: self.active_handle = self._edge_order[e_idx] # Save coordinates of rectangle at the start of handle movement. x1, x2, y1, y2 = self.extents # Switch variables so that only x2 and/or y2 are updated on move. if self.active_handle in ['W', 'SW', 'NW']: x1, x2 = x2, event.xdata if self.active_handle in ['N', 'NW', 'NE']: y1, y2 = y2, event.ydata self._extents_on_press = x1, x2, y1, y2 @property def geometry(self): """ Return an array of shape (2, 5) containing the x (``RectangleSelector.geometry[1, :]``) and y (``RectangleSelector.geometry[0, :]``) coordinates of the four corners of the rectangle starting and ending in the top left corner. """ if hasattr(self.to_draw, 'get_verts'): xfm = self.ax.transData.inverted() y, x = xfm.transform(self.to_draw.get_verts()).T return np.array([x, y]) else: return np.array(self.to_draw.get_data())
[docs]class EllipseSelector(RectangleSelector): """ Select an elliptical region of an axes. For the cursor to remain responsive you must keep a reference to it. Example usage:: import numpy as np import matplotlib.pyplot as plt from matplotlib.widgets import EllipseSelector def onselect(eclick, erelease): "eclick and erelease are matplotlib events at press and release." print('startposition: (%f, %f)' % (eclick.xdata, eclick.ydata)) print('endposition : (%f, %f)' % (erelease.xdata, erelease.ydata)) print('used button : ', eclick.button) def toggle_selector(event): print(' Key pressed.') if event.key in ['Q', 'q'] and toggle_selector.ES.active: print('EllipseSelector deactivated.') toggle_selector.RS.set_active(False) if event.key in ['A', 'a'] and not toggle_selector.ES.active: print('EllipseSelector activated.') toggle_selector.ES.set_active(True) x = np.arange(100.) / 99 y = np.sin(x) fig, ax = plt.subplots() ax.plot(x, y) toggle_selector.ES = EllipseSelector(ax, onselect, drawtype='line') fig.canvas.mpl_connect('key_press_event', toggle_selector) plt.show() """ _shape_klass = Ellipse
[docs] def draw_shape(self, extents): x1, x2, y1, y2 = extents xmin, xmax = sorted([x1, x2]) ymin, ymax = sorted([y1, y2]) center = [x1 + (x2 - x1) / 2., y1 + (y2 - y1) / 2.] a = (xmax - xmin) / 2. b = (ymax - ymin) / 2. if self.drawtype == 'box': self.to_draw.center = center self.to_draw.width = 2 * a self.to_draw.height = 2 * b else: rad = np.deg2rad(np.arange(31) * 12) x = a * np.cos(rad) + center[0] y = b * np.sin(rad) + center[1] self.to_draw.set_data(x, y)
@property def _rect_bbox(self): if self.drawtype == 'box': x, y = self.to_draw.center width = self.to_draw.width height = self.to_draw.height return x - width / 2., y - height / 2., width, height else: x, y = self.to_draw.get_data() x0, x1 = min(x), max(x) y0, y1 = min(y), max(y) return x0, y0, x1 - x0, y1 - y0
[docs]class LassoSelector(_SelectorWidget): """ Selection curve of an arbitrary shape. For the selector to remain responsive you must keep a reference to it. The selected path can be used in conjunction with `~.Path.contains_point` to select data points from an image. In contrast to `Lasso`, `LassoSelector` is written with an interface similar to `RectangleSelector` and `SpanSelector`, and will continue to interact with the axes until disconnected. Example usage:: ax = subplot(111) ax.plot(x, y) def onselect(verts): print(verts) lasso = LassoSelector(ax, onselect) Parameters ---------- ax : `~matplotlib.axes.Axes` The parent axes for the widget. onselect : function Whenever the lasso is released, the *onselect* function is called and passed the vertices of the selected path. button : `.MouseButton` or list of `.MouseButton`, optional The mouse buttons used for rectangle selection. Default is ``None``, which corresponds to all buttons. """ def __init__(self, ax, onselect=None, useblit=True, lineprops=None, button=None): _SelectorWidget.__init__(self, ax, onselect, useblit=useblit, button=button) self.verts = None if lineprops is None: lineprops = dict() # self.useblit may be != useblit, if the canvas doesn't support blit. lineprops.update(animated=self.useblit, visible=False) self.line = Line2D([], [], **lineprops) self.ax.add_line(self.line) self.artists = [self.line]
[docs] def onpress(self, event): self.press(event)
def _press(self, event): self.verts = [self._get_data(event)] self.line.set_visible(True)
[docs] def onrelease(self, event): self.release(event)
def _release(self, event): if self.verts is not None: self.verts.append(self._get_data(event)) self.onselect(self.verts) self.line.set_data([[], []]) self.line.set_visible(False) self.verts = None def _onmove(self, event): if self.verts is None: return self.verts.append(self._get_data(event)) self.line.set_data(list(zip(*self.verts))) self.update()
[docs]class PolygonSelector(_SelectorWidget): """ Select a polygon region of an axes. Place vertices with each mouse click, and make the selection by completing the polygon (clicking on the first vertex). Hold the *ctrl* key and click and drag a vertex to reposition it (the *ctrl* key is not necessary if the polygon has already been completed). Hold the *shift* key and click and drag anywhere in the axes to move all vertices. Press the *esc* key to start a new polygon. For the selector to remain responsive you must keep a reference to it. Parameters ---------- ax : `~matplotlib.axes.Axes` The parent axes for the widget. onselect : function When a polygon is completed or modified after completion, the `onselect` function is called and passed a list of the vertices as ``(xdata, ydata)`` tuples. useblit : bool, optional lineprops : dict, optional The line for the sides of the polygon is drawn with the properties given by `lineprops`. The default is ``dict(color='k', linestyle='-', linewidth=2, alpha=0.5)``. markerprops : dict, optional The markers for the vertices of the polygon are drawn with the properties given by `markerprops`. The default is ``dict(marker='o', markersize=7, mec='k', mfc='k', alpha=0.5)``. vertex_select_radius : float, optional A vertex is selected (to complete the polygon or to move a vertex) if the mouse click is within `vertex_select_radius` pixels of the vertex. The default radius is 15 pixels. Examples -------- :doc:`/gallery/widgets/polygon_selector_demo` """ def __init__(self, ax, onselect, useblit=False, lineprops=None, markerprops=None, vertex_select_radius=15): # The state modifiers 'move', 'square', and 'center' are expected by # _SelectorWidget but are not supported by PolygonSelector # Note: could not use the existing 'move' state modifier in-place of # 'move_all' because _SelectorWidget automatically discards 'move' # from the state on button release. state_modifier_keys = dict(clear='escape', move_vertex='control', move_all='shift', move='not-applicable', square='not-applicable', center='not-applicable') _SelectorWidget.__init__(self, ax, onselect, useblit=useblit, state_modifier_keys=state_modifier_keys) self._xs, self._ys = [0], [0] self._polygon_completed = False if lineprops is None: lineprops = dict(color='k', linestyle='-', linewidth=2, alpha=0.5) lineprops['animated'] = self.useblit self.line = Line2D(self._xs, self._ys, **lineprops) self.ax.add_line(self.line) if markerprops is None: markerprops = dict(mec='k', mfc=lineprops.get('color', 'k')) self._polygon_handles = ToolHandles(self.ax, self._xs, self._ys, useblit=self.useblit, marker_props=markerprops) self._active_handle_idx = -1 self.vertex_select_radius = vertex_select_radius self.artists = [self.line, self._polygon_handles.artist] self.set_visible(True) def _press(self, event): """Button press event handler""" # Check for selection of a tool handle. if ((self._polygon_completed or 'move_vertex' in self.state) and len(self._xs) > 0): h_idx, h_dist = self._polygon_handles.closest(event.x, event.y) if h_dist < self.vertex_select_radius: self._active_handle_idx = h_idx # Save the vertex positions at the time of the press event (needed to # support the 'move_all' state modifier). self._xs_at_press, self._ys_at_press = self._xs[:], self._ys[:] def _release(self, event): """Button release event handler""" # Release active tool handle. if self._active_handle_idx >= 0: self._active_handle_idx = -1 # Complete the polygon. elif (len(self._xs) > 3 and self._xs[-1] == self._xs[0] and self._ys[-1] == self._ys[0]): self._polygon_completed = True # Place new vertex. elif (not self._polygon_completed and 'move_all' not in self.state and 'move_vertex' not in self.state): self._xs.insert(-1, event.xdata) self._ys.insert(-1, event.ydata) if self._polygon_completed: self.onselect(self.verts)
[docs] def onmove(self, event): """Cursor move event handler and validator""" # Method overrides _SelectorWidget.onmove because the polygon selector # needs to process the move callback even if there is no button press. # _SelectorWidget.onmove include logic to ignore move event if # eventpress is None. if not self.ignore(event): event = self._clean_event(event) self._onmove(event) return True return False
def _onmove(self, event): """Cursor move event handler""" # Move the active vertex (ToolHandle). if self._active_handle_idx >= 0: idx = self._active_handle_idx self._xs[idx], self._ys[idx] = event.xdata, event.ydata # Also update the end of the polygon line if the first vertex is # the active handle and the polygon is completed. if idx == 0 and self._polygon_completed: self._xs[-1], self._ys[-1] = event.xdata, event.ydata # Move all vertices. elif 'move_all' in self.state and self.eventpress: dx = event.xdata - self.eventpress.xdata dy = event.ydata - self.eventpress.ydata for k in range(len(self._xs)): self._xs[k] = self._xs_at_press[k] + dx self._ys[k] = self._ys_at_press[k] + dy # Do nothing if completed or waiting for a move. elif (self._polygon_completed or 'move_vertex' in self.state or 'move_all' in self.state): return # Position pending vertex. else: # Calculate distance to the start vertex. x0, y0 = self.line.get_transform().transform((self._xs[0], self._ys[0])) v0_dist = np.hypot(x0 - event.x, y0 - event.y) # Lock on to the start vertex if near it and ready to complete. if len(self._xs) > 3 and v0_dist < self.vertex_select_radius: self._xs[-1], self._ys[-1] = self._xs[0], self._ys[0] else: self._xs[-1], self._ys[-1] = event.xdata, event.ydata self._draw_polygon() def _on_key_press(self, event): """Key press event handler""" # Remove the pending vertex if entering the 'move_vertex' or # 'move_all' mode if (not self._polygon_completed and ('move_vertex' in self.state or 'move_all' in self.state)): self._xs, self._ys = self._xs[:-1], self._ys[:-1] self._draw_polygon() def _on_key_release(self, event): """Key release event handler""" # Add back the pending vertex if leaving the 'move_vertex' or # 'move_all' mode (by checking the released key) if (not self._polygon_completed and (event.key == self.state_modifier_keys.get('move_vertex') or event.key == self.state_modifier_keys.get('move_all'))): self._xs.append(event.xdata) self._ys.append(event.ydata) self._draw_polygon() # Reset the polygon if the released key is the 'clear' key. elif event.key == self.state_modifier_keys.get('clear'): event = self._clean_event(event) self._xs, self._ys = [event.xdata], [event.ydata] self._polygon_completed = False self.set_visible(True) def _draw_polygon(self): """Redraw the polygon based on the new vertex positions.""" self.line.set_data(self._xs, self._ys) # Only show one tool handle at the start and end vertex of the polygon # if the polygon is completed or the user is locked on to the start # vertex. if (self._polygon_completed or (len(self._xs) > 3 and self._xs[-1] == self._xs[0] and self._ys[-1] == self._ys[0])): self._polygon_handles.set_data(self._xs[:-1], self._ys[:-1]) else: self._polygon_handles.set_data(self._xs, self._ys) self.update() @property def verts(self): """The polygon vertices, as a list of ``(x, y)`` pairs.""" return list(zip(self._xs[:-1], self._ys[:-1]))
[docs]class Lasso(AxesWidget): """ Selection curve of an arbitrary shape. The selected path can be used in conjunction with `~matplotlib.path.Path.contains_point` to select data points from an image. Unlike `LassoSelector`, this must be initialized with a starting point `xy`, and the `Lasso` events are destroyed upon release. Parameters ---------- ax : `~matplotlib.axes.Axes` The parent axes for the widget. xy : (float, float) Coordinates of the start of the lasso. callback : callable Whenever the lasso is released, the `callback` function is called and passed the vertices of the selected path. """ def __init__(self, ax, xy, callback=None, useblit=True): AxesWidget.__init__(self, ax) self.useblit = useblit and self.canvas.supports_blit if self.useblit: self.background = self.canvas.copy_from_bbox(self.ax.bbox) x, y = xy self.verts = [(x, y)] self.line = Line2D([x], [y], linestyle='-', color='black', lw=2) self.ax.add_line(self.line) self.callback = callback self.connect_event('button_release_event', self.onrelease) self.connect_event('motion_notify_event', self.onmove)
[docs] def onrelease(self, event): if self.ignore(event): return if self.verts is not None: self.verts.append((event.xdata, event.ydata)) if len(self.verts) > 2: self.callback(self.verts) self.ax.lines.remove(self.line) self.verts = None self.disconnect_events()
[docs] def onmove(self, event): if self.ignore(event): return if self.verts is None: return if event.inaxes != self.ax: return if event.button != 1: return self.verts.append((event.xdata, event.ydata)) self.line.set_data(list(zip(*self.verts))) if self.useblit: self.canvas.restore_region(self.background) self.ax.draw_artist(self.line) self.canvas.blit(self.ax.bbox) else: self.canvas.draw_idle()