You are reading an old version of the documentation (v3.1.1). For the latest version see
Version 3.1.2
Fork me on GitHub

Source code for matplotlib.path

A module for dealing with the polylines used throughout Matplotlib.

The primary class for polyline handling in Matplotlib is `Path`.  Almost all
vector drawing makes use of `Path`\s somewhere in the drawing pipeline.

Whilst a `Path` instance itself cannot be drawn, some `.Artist` subclasses,
such as `.PathPatch` and `.PathCollection`, can be used for convenient `Path`

from functools import lru_cache
from weakref import WeakValueDictionary

import numpy as np

from . import _path, cbook, rcParams
from .cbook import _to_unmasked_float_array, simple_linear_interpolation

[docs]class Path(object): """ :class:`Path` represents a series of possibly disconnected, possibly closed, line and curve segments. The underlying storage is made up of two parallel numpy arrays: - *vertices*: an Nx2 float array of vertices - *codes*: an N-length uint8 array of vertex types These two arrays always have the same length in the first dimension. For example, to represent a cubic curve, you must provide three vertices as well as three codes ``CURVE3``. The code types are: - ``STOP`` : 1 vertex (ignored) A marker for the end of the entire path (currently not required and ignored) - ``MOVETO`` : 1 vertex Pick up the pen and move to the given vertex. - ``LINETO`` : 1 vertex Draw a line from the current position to the given vertex. - ``CURVE3`` : 1 control point, 1 endpoint Draw a quadratic Bezier curve from the current position, with the given control point, to the given end point. - ``CURVE4`` : 2 control points, 1 endpoint Draw a cubic Bezier curve from the current position, with the given control points, to the given end point. - ``CLOSEPOLY`` : 1 vertex (ignored) Draw a line segment to the start point of the current polyline. Users of Path objects should not access the vertices and codes arrays directly. Instead, they should use :meth:`iter_segments` or :meth:`cleaned` to get the vertex/code pairs. This is important, since many :class:`Path` objects, as an optimization, do not store a *codes* at all, but have a default one provided for them by :meth:`iter_segments`. Some behavior of Path objects can be controlled by rcParams. See the rcParams whose keys contain 'path.'. .. note:: The vertices and codes arrays should be treated as immutable -- there are a number of optimizations and assumptions made up front in the constructor that will not change when the data changes. """ code_type = np.uint8 # Path codes STOP = code_type(0) # 1 vertex MOVETO = code_type(1) # 1 vertex LINETO = code_type(2) # 1 vertex CURVE3 = code_type(3) # 2 vertices CURVE4 = code_type(4) # 3 vertices CLOSEPOLY = code_type(79) # 1 vertex #: A dictionary mapping Path codes to the number of vertices that the #: code expects. NUM_VERTICES_FOR_CODE = {STOP: 1, MOVETO: 1, LINETO: 1, CURVE3: 2, CURVE4: 3, CLOSEPOLY: 1} def __init__(self, vertices, codes=None, _interpolation_steps=1, closed=False, readonly=False): """ Create a new path with the given vertices and codes. Parameters ---------- vertices : array_like The ``(n, 2)`` float array, masked array or sequence of pairs representing the vertices of the path. If *vertices* contains masked values, they will be converted to NaNs which are then handled correctly by the Agg PathIterator and other consumers of path data, such as :meth:`iter_segments`. codes : {None, array_like}, optional n-length array integers representing the codes of the path. If not None, codes must be the same length as vertices. If None, *vertices* will be treated as a series of line segments. _interpolation_steps : int, optional Used as a hint to certain projections, such as Polar, that this path should be linearly interpolated immediately before drawing. This attribute is primarily an implementation detail and is not intended for public use. closed : bool, optional If *codes* is None and closed is True, vertices will be treated as line segments of a closed polygon. readonly : bool, optional Makes the path behave in an immutable way and sets the vertices and codes as read-only arrays. """ vertices = _to_unmasked_float_array(vertices) if vertices.ndim != 2 or vertices.shape[1] != 2: raise ValueError( "'vertices' must be a 2D list or array with shape Nx2") if codes is not None: codes = np.asarray(codes, self.code_type) if codes.ndim != 1 or len(codes) != len(vertices): raise ValueError("'codes' must be a 1D list or array with the " "same length of 'vertices'") if len(codes) and codes[0] != self.MOVETO: raise ValueError("The first element of 'code' must be equal " "to 'MOVETO' ({})".format(self.MOVETO)) elif closed and len(vertices): codes = np.empty(len(vertices), dtype=self.code_type) codes[0] = self.MOVETO codes[1:-1] = self.LINETO codes[-1] = self.CLOSEPOLY self._vertices = vertices self._codes = codes self._interpolation_steps = _interpolation_steps self._update_values() if readonly: self._vertices.flags.writeable = False if self._codes is not None: self._codes.flags.writeable = False self._readonly = True else: self._readonly = False @classmethod def _fast_from_codes_and_verts(cls, verts, codes, internals_from=None): """ Creates a Path instance without the expense of calling the constructor. Parameters ---------- verts : numpy array codes : numpy array internals_from : Path or None If not None, another `Path` from which the attributes ``should_simplify``, ``simplify_threshold``, and ``interpolation_steps`` will be copied. Note that ``readonly`` is never copied, and always set to ``False`` by this constructor. """ pth = cls.__new__(cls) pth._vertices = _to_unmasked_float_array(verts) pth._codes = codes pth._readonly = False if internals_from is not None: pth._should_simplify = internals_from._should_simplify pth._simplify_threshold = internals_from._simplify_threshold pth._interpolation_steps = internals_from._interpolation_steps else: pth._should_simplify = True pth._simplify_threshold = rcParams['path.simplify_threshold'] pth._interpolation_steps = 1 return pth def _update_values(self): self._simplify_threshold = rcParams['path.simplify_threshold'] self._should_simplify = ( self._simplify_threshold > 0 and rcParams['path.simplify'] and len(self._vertices) >= 128 and (self._codes is None or np.all(self._codes <= Path.LINETO)) ) @property def vertices(self): """ The list of vertices in the `Path` as an Nx2 numpy array. """ return self._vertices @vertices.setter def vertices(self, vertices): if self._readonly: raise AttributeError("Can't set vertices on a readonly Path") self._vertices = vertices self._update_values() @property def codes(self): """ The list of codes in the `Path` as a 1-D numpy array. Each code is one of `STOP`, `MOVETO`, `LINETO`, `CURVE3`, `CURVE4` or `CLOSEPOLY`. For codes that correspond to more than one vertex (`CURVE3` and `CURVE4`), that code will be repeated so that the length of `self.vertices` and `` is always the same. """ return self._codes @codes.setter def codes(self, codes): if self._readonly: raise AttributeError("Can't set codes on a readonly Path") self._codes = codes self._update_values() @property def simplify_threshold(self): """ The fraction of a pixel difference below which vertices will be simplified out. """ return self._simplify_threshold @simplify_threshold.setter def simplify_threshold(self, threshold): self._simplify_threshold = threshold @cbook.deprecated( "3.1", alternative="not np.isfinite(self.vertices).all()") @property def has_nonfinite(self): """ `True` if the vertices array has nonfinite values. """ return not np.isfinite(self._vertices).all() @property def should_simplify(self): """ `True` if the vertices array should be simplified. """ return self._should_simplify @should_simplify.setter def should_simplify(self, should_simplify): self._should_simplify = should_simplify @property def readonly(self): """ `True` if the `Path` is read-only. """ return self._readonly def __copy__(self): """ Returns a shallow copy of the `Path`, which will share the vertices and codes with the source `Path`. """ import copy return copy.copy(self) copy = __copy__ def __deepcopy__(self, memo=None): """ Returns a deepcopy of the `Path`. The `Path` will not be readonly, even if the source `Path` is. """ try: codes = except AttributeError: codes = None return self.__class__( self.vertices.copy(), codes, _interpolation_steps=self._interpolation_steps) deepcopy = __deepcopy__
[docs] @classmethod def make_compound_path_from_polys(cls, XY): """ Make a compound path object to draw a number of polygons with equal numbers of sides XY is a (numpolys x numsides x 2) numpy array of vertices. Return object is a :class:`Path` .. plot:: gallery/misc/ """ # for each poly: 1 for the MOVETO, (numsides-1) for the LINETO, 1 for # the CLOSEPOLY; the vert for the closepoly is ignored but we still # need it to keep the codes aligned with the vertices numpolys, numsides, two = XY.shape if two != 2: raise ValueError("The third dimension of 'XY' must be 2") stride = numsides + 1 nverts = numpolys * stride verts = np.zeros((nverts, 2)) codes = np.full(nverts, cls.LINETO, dtype=cls.code_type) codes[0::stride] = cls.MOVETO codes[numsides::stride] = cls.CLOSEPOLY for i in range(numsides): verts[i::stride] = XY[:, i] return cls(verts, codes)
[docs] @classmethod def make_compound_path(cls, *args): """Make a compound path from a list of Path objects.""" # Handle an empty list in args (i.e. no args). if not args: return Path(np.empty([0, 2], dtype=np.float32)) lengths = [len(x) for x in args] total_length = sum(lengths) vertices = np.vstack([x.vertices for x in args]) vertices.reshape((total_length, 2)) codes = np.empty(total_length, dtype=cls.code_type) i = 0 for path in args: if is None: codes[i] = cls.MOVETO codes[i + 1:i + len(path.vertices)] = cls.LINETO else: codes[i:i + len(] = i += len(path.vertices) return cls(vertices, codes)
def __repr__(self): return "Path(%r, %r)" % (self.vertices, def __len__(self): return len(self.vertices)
[docs] def iter_segments(self, transform=None, remove_nans=True, clip=None, snap=False, stroke_width=1.0, simplify=None, curves=True, sketch=None): """ Iterates over all of the curve segments in the path. Each iteration returns a 2-tuple ``(vertices, code)``, where ``vertices`` is a sequence of 1-3 coordinate pairs, and ``code`` is a `Path` code. Additionally, this method can provide a number of standard cleanups and conversions to the path. Parameters ---------- transform : None or :class:`~matplotlib.transforms.Transform` If not None, the given affine transformation will be applied to the path. remove_nans : bool, optional Whether to remove all NaNs from the path and skip over them using MOVETO commands. clip : None or (float, float, float, float), optional If not None, must be a four-tuple (x1, y1, x2, y2) defining a rectangle in which to clip the path. snap : None or bool, optional If True, snap all nodes to pixels; if False, don't snap them. If None, perform snapping if the path contains only segments parallel to the x or y axes, and no more than 1024 of them. stroke_width : float, optional The width of the stroke being drawn (used for path snapping). simplify : None or bool, optional Whether to simplify the path by removing vertices that do not affect its appearance. If None, use the :attr:`should_simplify` attribute. See also :rc:`path.simplify` and :rc:`path.simplify_threshold`. curves : bool, optional If True, curve segments will be returned as curve segments. If False, all curves will be converted to line segments. sketch : None or sequence, optional If not None, must be a 3-tuple of the form (scale, length, randomness), representing the sketch parameters. """ if not len(self): return cleaned = self.cleaned(transform=transform, remove_nans=remove_nans, clip=clip, snap=snap, stroke_width=stroke_width, simplify=simplify, curves=curves, sketch=sketch) # Cache these object lookups for performance in the loop. NUM_VERTICES_FOR_CODE = self.NUM_VERTICES_FOR_CODE STOP = self.STOP vertices = iter(cleaned.vertices) codes = iter( for curr_vertices, code in zip(vertices, codes): if code == STOP: break extra_vertices = NUM_VERTICES_FOR_CODE[code] - 1 if extra_vertices: for i in range(extra_vertices): next(codes) curr_vertices = np.append(curr_vertices, next(vertices)) yield curr_vertices, code
[docs] def cleaned(self, transform=None, remove_nans=False, clip=None, quantize=False, simplify=False, curves=False, stroke_width=1.0, snap=False, sketch=None): """ Return a new Path with vertices and codes cleaned according to the parameters. See Also -------- Path.iter_segments : for details of the keyword arguments. """ vertices, codes = _path.cleanup_path( self, transform, remove_nans, clip, snap, stroke_width, simplify, curves, sketch) pth = Path._fast_from_codes_and_verts(vertices, codes, self) if not simplify: pth._should_simplify = False return pth
[docs] def transformed(self, transform): """ Return a transformed copy of the path. See Also -------- matplotlib.transforms.TransformedPath A specialized path class that will cache the transformed result and automatically update when the transform changes. """ return Path(transform.transform(self.vertices),, self._interpolation_steps)
[docs] def contains_point(self, point, transform=None, radius=0.0): """ Returns whether the (closed) path contains the given point. If *transform* is not ``None``, the path will be transformed before performing the test. *radius* allows the path to be made slightly larger or smaller. """ if transform is not None: transform = transform.frozen() # `point_in_path` does not handle nonlinear transforms, so we # transform the path ourselves. If `transform` is affine, letting # `point_in_path` handle the transform avoids allocating an extra # buffer. if transform and not transform.is_affine: self = transform.transform_path(self) transform = None return _path.point_in_path(point[0], point[1], radius, self, transform)
[docs] def contains_points(self, points, transform=None, radius=0.0): """ Returns a bool array which is ``True`` if the (closed) path contains the corresponding point. If *transform* is not ``None``, the path will be transformed before performing the test. *radius* allows the path to be made slightly larger or smaller. """ if transform is not None: transform = transform.frozen() result = _path.points_in_path(points, radius, self, transform) return result.astype('bool')
[docs] def contains_path(self, path, transform=None): """ Returns whether this (closed) path completely contains the given path. If *transform* is not ``None``, the path will be transformed before performing the test. """ if transform is not None: transform = transform.frozen() return _path.path_in_path(self, None, path, transform)
[docs] def get_extents(self, transform=None): """ Returns the extents (*xmin*, *ymin*, *xmax*, *ymax*) of the path. Unlike computing the extents on the *vertices* alone, this algorithm will take into account the curves and deal with control points appropriately. """ from .transforms import Bbox path = self if transform is not None: transform = transform.frozen() if not transform.is_affine: path = self.transformed(transform) transform = None return Bbox(_path.get_path_extents(path, transform))
[docs] def intersects_path(self, other, filled=True): """ Returns *True* if this path intersects another given path. *filled*, when True, treats the paths as if they were filled. That is, if one path completely encloses the other, :meth:`intersects_path` will return True. """ return _path.path_intersects_path(self, other, filled)
[docs] def intersects_bbox(self, bbox, filled=True): """ Returns *True* if this path intersects a given :class:`~matplotlib.transforms.Bbox`. *filled*, when True, treats the path as if it was filled. That is, if the path completely encloses the bounding box, :meth:`intersects_bbox` will return True. The bounding box is always considered filled. """ return _path.path_intersects_rectangle(self, bbox.x0, bbox.y0, bbox.x1, bbox.y1, filled)
[docs] def interpolated(self, steps): """ Returns a new path resampled to length N x steps. Does not currently handle interpolating curves. """ if steps == 1: return self vertices = simple_linear_interpolation(self.vertices, steps) codes = if codes is not None: new_codes = np.full((len(codes) - 1) * steps + 1, Path.LINETO, dtype=self.code_type) new_codes[0::steps] = codes else: new_codes = None return Path(vertices, new_codes)
[docs] def to_polygons(self, transform=None, width=0, height=0, closed_only=True): """ Convert this path to a list of polygons or polylines. Each polygon/polyline is an Nx2 array of vertices. In other words, each polygon has no ``MOVETO`` instructions or curves. This is useful for displaying in backends that do not support compound paths or Bezier curves. If *width* and *height* are both non-zero then the lines will be simplified so that vertices outside of (0, 0), (width, height) will be clipped. If *closed_only* is `True` (default), only closed polygons, with the last point being the same as the first point, will be returned. Any unclosed polylines in the path will be explicitly closed. If *closed_only* is `False`, any unclosed polygons in the path will be returned as unclosed polygons, and the closed polygons will be returned explicitly closed by setting the last point to the same as the first point. """ if len(self.vertices) == 0: return [] if transform is not None: transform = transform.frozen() if is None and (width == 0 or height == 0): vertices = self.vertices if closed_only: if len(vertices) < 3: return [] elif np.any(vertices[0] != vertices[-1]): vertices = [*vertices, vertices[0]] if transform is None: return [vertices] else: return [transform.transform(vertices)] # Deal with the case where there are curves and/or multiple # subpaths (using extension code) return _path.convert_path_to_polygons( self, transform, width, height, closed_only)
_unit_rectangle = None
[docs] @classmethod def unit_rectangle(cls): """ Return a `Path` instance of the unit rectangle from (0, 0) to (1, 1). """ if cls._unit_rectangle is None: cls._unit_rectangle = \ cls([[0.0, 0.0], [1.0, 0.0], [1.0, 1.0], [0.0, 1.0], [0.0, 0.0]], [cls.MOVETO, cls.LINETO, cls.LINETO, cls.LINETO, cls.CLOSEPOLY], readonly=True) return cls._unit_rectangle
_unit_regular_polygons = WeakValueDictionary()
[docs] @classmethod def unit_regular_polygon(cls, numVertices): """ Return a :class:`Path` instance for a unit regular polygon with the given *numVertices* and radius of 1.0, centered at (0, 0). """ if numVertices <= 16: path = cls._unit_regular_polygons.get(numVertices) else: path = None if path is None: theta = ((2 * np.pi / numVertices) * np.arange(numVertices + 1) # This initial rotation is to make sure the polygon always # "points-up". + np.pi / 2) verts = np.column_stack((np.cos(theta), np.sin(theta))) codes = np.empty(numVertices + 1) codes[0] = cls.MOVETO codes[1:-1] = cls.LINETO codes[-1] = cls.CLOSEPOLY path = cls(verts, codes, readonly=True) if numVertices <= 16: cls._unit_regular_polygons[numVertices] = path return path
_unit_regular_stars = WeakValueDictionary()
[docs] @classmethod def unit_regular_star(cls, numVertices, innerCircle=0.5): """ Return a :class:`Path` for a unit regular star with the given numVertices and radius of 1.0, centered at (0, 0). """ if numVertices <= 16: path = cls._unit_regular_stars.get((numVertices, innerCircle)) else: path = None if path is None: ns2 = numVertices * 2 theta = (2*np.pi/ns2 * np.arange(ns2 + 1)) # This initial rotation is to make sure the polygon always # "points-up" theta += np.pi / 2.0 r = np.ones(ns2 + 1) r[1::2] = innerCircle verts = np.vstack((r*np.cos(theta), r*np.sin(theta))).transpose() codes = np.empty((ns2 + 1,)) codes[0] = cls.MOVETO codes[1:-1] = cls.LINETO codes[-1] = cls.CLOSEPOLY path = cls(verts, codes, readonly=True) if numVertices <= 16: cls._unit_regular_stars[(numVertices, innerCircle)] = path return path
[docs] @classmethod def unit_regular_asterisk(cls, numVertices): """ Return a :class:`Path` for a unit regular asterisk with the given numVertices and radius of 1.0, centered at (0, 0). """ return cls.unit_regular_star(numVertices, 0.0)
_unit_circle = None
[docs] @classmethod def unit_circle(cls): """ Return the readonly :class:`Path` of the unit circle. For most cases, :func:`` will be what you want. """ if cls._unit_circle is None: cls._unit_circle =, 0), radius=1, readonly=True) return cls._unit_circle
[docs] @classmethod def circle(cls, center=(0., 0.), radius=1., readonly=False): """ Return a `Path` representing a circle of a given radius and center. Parameters ---------- center : pair of floats The center of the circle. Default ``(0, 0)``. radius : float The radius of the circle. Default is 1. readonly : bool Whether the created path should have the "readonly" argument set when creating the Path instance. Notes ----- The circle is approximated using 8 cubic Bezier curves, as described in Lancaster, Don. `Approximating a Circle or an Ellipse Using Four Bezier Cubic Splines <>`_. """ MAGIC = 0.2652031 SQRTHALF = np.sqrt(0.5) MAGIC45 = SQRTHALF * MAGIC vertices = np.array([[0.0, -1.0], [MAGIC, -1.0], [SQRTHALF-MAGIC45, -SQRTHALF-MAGIC45], [SQRTHALF, -SQRTHALF], [SQRTHALF+MAGIC45, -SQRTHALF+MAGIC45], [1.0, -MAGIC], [1.0, 0.0], [1.0, MAGIC], [SQRTHALF+MAGIC45, SQRTHALF-MAGIC45], [SQRTHALF, SQRTHALF], [SQRTHALF-MAGIC45, SQRTHALF+MAGIC45], [MAGIC, 1.0], [0.0, 1.0], [-MAGIC, 1.0], [-SQRTHALF+MAGIC45, SQRTHALF+MAGIC45], [-SQRTHALF, SQRTHALF], [-SQRTHALF-MAGIC45, SQRTHALF-MAGIC45], [-1.0, MAGIC], [-1.0, 0.0], [-1.0, -MAGIC], [-SQRTHALF-MAGIC45, -SQRTHALF+MAGIC45], [-SQRTHALF, -SQRTHALF], [-SQRTHALF+MAGIC45, -SQRTHALF-MAGIC45], [-MAGIC, -1.0], [0.0, -1.0], [0.0, -1.0]], dtype=float) codes = [cls.CURVE4] * 26 codes[0] = cls.MOVETO codes[-1] = cls.CLOSEPOLY return Path(vertices * radius + center, codes, readonly=readonly)
_unit_circle_righthalf = None
[docs] @classmethod def unit_circle_righthalf(cls): """ Return a `Path` of the right half of a unit circle. See `` for the reference on the approximation used. """ if cls._unit_circle_righthalf is None: MAGIC = 0.2652031 SQRTHALF = np.sqrt(0.5) MAGIC45 = SQRTHALF * MAGIC vertices = np.array( [[0.0, -1.0], [MAGIC, -1.0], [SQRTHALF-MAGIC45, -SQRTHALF-MAGIC45], [SQRTHALF, -SQRTHALF], [SQRTHALF+MAGIC45, -SQRTHALF+MAGIC45], [1.0, -MAGIC], [1.0, 0.0], [1.0, MAGIC], [SQRTHALF+MAGIC45, SQRTHALF-MAGIC45], [SQRTHALF, SQRTHALF], [SQRTHALF-MAGIC45, SQRTHALF+MAGIC45], [MAGIC, 1.0], [0.0, 1.0], [0.0, -1.0]], float) codes = np.full(14, cls.CURVE4, dtype=cls.code_type) codes[0] = cls.MOVETO codes[-1] = cls.CLOSEPOLY cls._unit_circle_righthalf = cls(vertices, codes, readonly=True) return cls._unit_circle_righthalf
[docs] @classmethod def arc(cls, theta1, theta2, n=None, is_wedge=False): """ Return the unit circle arc from angles *theta1* to *theta2* (in degrees). *theta2* is unwrapped to produce the shortest arc within 360 degrees. That is, if *theta2* > *theta1* + 360, the arc will be from *theta1* to *theta2* - 360 and not a full circle plus some extra overlap. If *n* is provided, it is the number of spline segments to make. If *n* is not provided, the number of spline segments is determined based on the delta between *theta1* and *theta2*. Masionobe, L. 2003. `Drawing an elliptical arc using polylines, quadratic or cubic Bezier curves <>`_. """ halfpi = np.pi * 0.5 eta1 = theta1 eta2 = theta2 - 360 * np.floor((theta2 - theta1) / 360) # Ensure 2pi range is not flattened to 0 due to floating-point errors, # but don't try to expand existing 0 range. if theta2 != theta1 and eta2 <= eta1: eta2 += 360 eta1, eta2 = np.deg2rad([eta1, eta2]) # number of curve segments to make if n is None: n = int(2 ** np.ceil((eta2 - eta1) / halfpi)) if n < 1: raise ValueError("n must be >= 1 or None") deta = (eta2 - eta1) / n t = np.tan(0.5 * deta) alpha = np.sin(deta) * (np.sqrt(4.0 + 3.0 * t * t) - 1) / 3.0 steps = np.linspace(eta1, eta2, n + 1, True) cos_eta = np.cos(steps) sin_eta = np.sin(steps) xA = cos_eta[:-1] yA = sin_eta[:-1] xA_dot = -yA yA_dot = xA xB = cos_eta[1:] yB = sin_eta[1:] xB_dot = -yB yB_dot = xB if is_wedge: length = n * 3 + 4 vertices = np.zeros((length, 2), float) codes = np.full(length, cls.CURVE4, dtype=cls.code_type) vertices[1] = [xA[0], yA[0]] codes[0:2] = [cls.MOVETO, cls.LINETO] codes[-2:] = [cls.LINETO, cls.CLOSEPOLY] vertex_offset = 2 end = length - 2 else: length = n * 3 + 1 vertices = np.empty((length, 2), float) codes = np.full(length, cls.CURVE4, dtype=cls.code_type) vertices[0] = [xA[0], yA[0]] codes[0] = cls.MOVETO vertex_offset = 1 end = length vertices[vertex_offset:end:3, 0] = xA + alpha * xA_dot vertices[vertex_offset:end:3, 1] = yA + alpha * yA_dot vertices[vertex_offset+1:end:3, 0] = xB - alpha * xB_dot vertices[vertex_offset+1:end:3, 1] = yB - alpha * yB_dot vertices[vertex_offset+2:end:3, 0] = xB vertices[vertex_offset+2:end:3, 1] = yB return cls(vertices, codes, readonly=True)
[docs] @classmethod def wedge(cls, theta1, theta2, n=None): """ Return the unit circle wedge from angles *theta1* to *theta2* (in degrees). *theta2* is unwrapped to produce the shortest wedge within 360 degrees. That is, if *theta2* > *theta1* + 360, the wedge will be from *theta1* to *theta2* - 360 and not a full circle plus some extra overlap. If *n* is provided, it is the number of spline segments to make. If *n* is not provided, the number of spline segments is determined based on the delta between *theta1* and *theta2*. See `Path.arc` for the reference on the approximation used. """ return cls.arc(theta1, theta2, n, True)
[docs] @staticmethod @lru_cache(8) def hatch(hatchpattern, density=6): """ Given a hatch specifier, *hatchpattern*, generates a Path that can be used in a repeated hatching pattern. *density* is the number of lines per unit square. """ from matplotlib.hatch import get_path return (get_path(hatchpattern, density) if hatchpattern is not None else None)
[docs] def clip_to_bbox(self, bbox, inside=True): """ Clip the path to the given bounding box. The path must be made up of one or more closed polygons. This algorithm will not behave correctly for unclosed paths. If *inside* is `True`, clip to the inside of the box, otherwise to the outside of the box. """ # Use make_compound_path_from_polys verts = _path.clip_path_to_rect(self, bbox, inside) paths = [Path(poly) for poly in verts] return self.make_compound_path(*paths)
[docs]def get_path_collection_extents( master_transform, paths, transforms, offsets, offset_transform): r""" Given a sequence of `Path`\s, `~.Transform`\s objects, and offsets, as found in a `~.PathCollection`, returns the bounding box that encapsulates all of them. Parameters ---------- master_transform : `~.Transform` Global transformation applied to all paths. paths : list of `Path` transform : list of `~.Affine2D` offsets : (N, 2) array-like offset_transform : `~.Affine2D` Transform applied to the offsets before offsetting the path. Notes ----- The way that *paths*, *transforms* and *offsets* are combined follows the same method as for collections: Each is iterated over independently, so if you have 3 paths, 2 transforms and 1 offset, their combinations are as follows: (A, A, A), (B, B, A), (C, A, A) """ from .transforms import Bbox if len(paths) == 0: raise ValueError("No paths provided") return Bbox.from_extents(*_path.get_path_collection_extents( master_transform, paths, np.atleast_3d(transforms), offsets, offset_transform))
[docs]@cbook.deprecated("3.1", alternative="get_paths_collection_extents") def get_paths_extents(paths, transforms=[]): """ Given a sequence of :class:`Path` objects and optional :class:`~matplotlib.transforms.Transform` objects, returns the bounding box that encapsulates all of them. *paths* is a sequence of :class:`Path` instances. *transforms* is an optional sequence of :class:`~matplotlib.transforms.Affine2D` instances to apply to each path. """ from .transforms import Bbox, Affine2D if len(paths) == 0: raise ValueError("No paths provided") return Bbox.from_extents(*_path.get_path_collection_extents( Affine2D(), paths, transforms, [], Affine2D()))