You are reading an old version of the documentation (v3.0.0). For the latest version see https://matplotlib.org/stable/api/ticker_api.html
Version 3.0.0
matplotlib
Fork me on GitHub

Table Of Contents

ticker

matplotlib.ticker

Tick locating and formatting

This module contains classes to support completely configurable tick locating and formatting. Although the locators know nothing about major or minor ticks, they are used by the Axis class to support major and minor tick locating and formatting. Generic tick locators and formatters are provided, as well as domain specific custom ones.

Default Formatter

The default formatter identifies when the x-data being plotted is a small range on top of a large off set. To reduce the chances that the ticklabels overlap the ticks are labeled as deltas from a fixed offset. For example:

ax.plot(np.arange(2000, 2010), range(10))

will have tick of 0-9 with an offset of +2e3. If this is not desired turn off the use of the offset on the default formatter:

ax.get_xaxis().get_major_formatter().set_useOffset(False)

set the rcParam axes.formatter.useoffset=False to turn it off globally, or set a different formatter.

Tick locating

The Locator class is the base class for all tick locators. The locators handle autoscaling of the view limits based on the data limits, and the choosing of tick locations. A useful semi-automatic tick locator is MultipleLocator. It is initialized with a base, e.g., 10, and it picks axis limits and ticks that are multiples of that base.

The Locator subclasses defined here are

AutoLocator
MaxNLocator with simple defaults. This is the default tick locator for most plotting.
MaxNLocator
Finds up to a max number of intervals with ticks at nice locations.
LinearLocator
Space ticks evenly from min to max.
LogLocator
Space ticks logarithmically from min to max.
MultipleLocator
Ticks and range are a multiple of base; either integer or float.
FixedLocator
Tick locations are fixed.
IndexLocator
Locator for index plots (e.g., where x = range(len(y))).
NullLocator
No ticks.
SymmetricalLogLocator
Locator for use with with the symlog norm; works like LogLocator for the part outside of the threshold and adds 0 if inside the limits.
LogitLocator
Locator for logit scaling.
OldAutoLocator
Choose a MultipleLocator and dynamically reassign it for intelligent ticking during navigation.
AutoMinorLocator
Locator for minor ticks when the axis is linear and the major ticks are uniformly spaced. Subdivides the major tick interval into a specified number of minor intervals, defaulting to 4 or 5 depending on the major interval.

There are a number of locators specialized for date locations - see the dates module.

You can define your own locator by deriving from Locator. You must override the __call__ method, which returns a sequence of locations, and you will probably want to override the autoscale method to set the view limits from the data limits.

If you want to override the default locator, use one of the above or a custom locator and pass it to the x or y axis instance. The relevant methods are:

ax.xaxis.set_major_locator(xmajor_locator)
ax.xaxis.set_minor_locator(xminor_locator)
ax.yaxis.set_major_locator(ymajor_locator)
ax.yaxis.set_minor_locator(yminor_locator)

The default minor locator is NullLocator, i.e., no minor ticks on by default.

Tick formatting

Tick formatting is controlled by classes derived from Formatter. The formatter operates on a single tick value and returns a string to the axis.

NullFormatter
No labels on the ticks.
IndexFormatter
Set the strings from a list of labels.
FixedFormatter
Set the strings manually for the labels.
FuncFormatter
User defined function sets the labels.
StrMethodFormatter
Use string format method.
FormatStrFormatter
Use an old-style sprintf format string.
ScalarFormatter
Default formatter for scalars: autopick the format string.
LogFormatter
Formatter for log axes.
LogFormatterExponent
Format values for log axis using exponent = log_base(value).
LogFormatterMathtext
Format values for log axis using exponent = log_base(value) using Math text.
LogFormatterSciNotation
Format values for log axis using scientific notation.
LogitFormatter
Probability formatter.
EngFormatter
Format labels in engineering notation
PercentFormatter
Format labels as a percentage

You can derive your own formatter from the Formatter base class by simply overriding the __call__ method. The formatter class has access to the axis view and data limits.

To control the major and minor tick label formats, use one of the following methods:

ax.xaxis.set_major_formatter(xmajor_formatter)
ax.xaxis.set_minor_formatter(xminor_formatter)
ax.yaxis.set_major_formatter(ymajor_formatter)
ax.yaxis.set_minor_formatter(yminor_formatter)

See Major Minor Demo for an example of setting major and minor ticks. See the matplotlib.dates module for more information and examples of using date locators and formatters.

class matplotlib.ticker.TickHelper[source]

Bases: object

axis = None
create_dummy_axis(**kwargs)[source]
set_axis(axis)[source]
set_bounds(vmin, vmax)[source]
set_data_interval(vmin, vmax)[source]
set_view_interval(vmin, vmax)[source]
class matplotlib.ticker.Formatter[source]

Bases: matplotlib.ticker.TickHelper

Create a string based on a tick value and location.

fix_minus(s)[source]

Some classes may want to replace a hyphen for minus with the proper unicode symbol (U+2212) for typographical correctness. The default is to not replace it.

Note, if you use this method, e.g., in format_data() or call, you probably don't want to use it for format_data_short() since the toolbar uses this for interactive coord reporting and I doubt we can expect GUIs across platforms will handle the unicode correctly. So for now the classes that override fix_minus() should have an explicit format_data_short() method

format_data(value)[source]

Returns the full string representation of the value with the position unspecified.

format_data_short(value)[source]

Return a short string version of the tick value.

Defaults to the position-independent long value.

get_offset()[source]
locs = []
set_locs(locs)[source]
class matplotlib.ticker.FixedFormatter(seq)[source]

Bases: matplotlib.ticker.Formatter

Return fixed strings for tick labels based only on position, not value.

Set the sequence of strings that will be used for labels.

get_offset()[source]
set_offset_string(ofs)[source]
class matplotlib.ticker.NullFormatter[source]

Bases: matplotlib.ticker.Formatter

Always return the empty string.

class matplotlib.ticker.FuncFormatter(func)[source]

Bases: matplotlib.ticker.Formatter

Use a user-defined function for formatting.

The function should take in two inputs (a tick value x and a position pos), and return a string containing the corresponding tick label.

class matplotlib.ticker.FormatStrFormatter(fmt)[source]

Bases: matplotlib.ticker.Formatter

Use an old-style ('%' operator) format string to format the tick.

The format string should have a single variable format (%) in it. It will be applied to the value (not the position) of the tick.

class matplotlib.ticker.StrMethodFormatter(fmt)[source]

Bases: matplotlib.ticker.Formatter

Use a new-style format string (as used by str.format()) to format the tick.

The field used for the value must be labeled x and the field used for the position must be labeled pos.

class matplotlib.ticker.ScalarFormatter(useOffset=None, useMathText=None, useLocale=None)[source]

Bases: matplotlib.ticker.Formatter

Format tick values as a number.

Tick value is interpreted as a plain old number. If useOffset==True and the data range is much smaller than the data average, then an offset will be determined such that the tick labels are meaningful. Scientific notation is used for data < 10^-n or data >= 10^m, where n and m are the power limits set using set_powerlimits((n,m)). The defaults for these are controlled by the axes.formatter.limits rc parameter.

fix_minus(s)[source]

Replace hyphens with a unicode minus.

format_data(value)[source]

Return a formatted string representation of a number.

format_data_short(value)[source]

Return a short formatted string representation of a number.

get_offset()[source]

Return scientific notation, plus offset.

get_useLocale()[source]
get_useMathText()[source]
get_useOffset()[source]
pprint_val(x)[source]
set_locs(locs)[source]

Set the locations of the ticks.

set_powerlimits(lims)[source]

Sets size thresholds for scientific notation.

Parameters:
lims : (min_exp, max_exp)

A tuple containing the powers of 10 that determine the switchover threshold. Numbers below 10**min_exp and above 10**max_exp will be displayed in scientific notation.

For example, formatter.set_powerlimits((-3, 4)) sets the pre-2007 default in which scientific notation is used for numbers less than 1e-3 or greater than 1e4.

.. seealso:: Method :meth:`set_scientific`
set_scientific(b)[source]

Turn scientific notation on or off.

See also

Method set_powerlimits()

set_useLocale(val)[source]
set_useMathText(val)[source]
set_useOffset(val)[source]
useLocale
useMathText
useOffset
class matplotlib.ticker.LogFormatter(base=10.0, labelOnlyBase=False, minor_thresholds=None, linthresh=None)[source]

Bases: matplotlib.ticker.Formatter

Base class for formatting ticks on a log or symlog scale.

It may be instantiated directly, or subclassed.

Parameters:
base : float, optional, default: 10.

Base of the logarithm used in all calculations.

labelOnlyBase : bool, optional, default: False

If True, label ticks only at integer powers of base. This is normally True for major ticks and False for minor ticks.

minor_thresholds : (subset, all), optional, default: (1, 0.4)

If labelOnlyBase is False, these two numbers control the labeling of ticks that are not at integer powers of base; normally these are the minor ticks. The controlling parameter is the log of the axis data range. In the typical case where base is 10 it is the number of decades spanned by the axis, so we can call it 'numdec'. If numdec <= all, all minor ticks will be labeled. If all < numdec <= subset, then only a subset of minor ticks will be labeled, so as to avoid crowding. If numdec > subset then no minor ticks will be labeled.

linthresh : None or float, optional, default: None

If a symmetric log scale is in use, its linthresh parameter must be supplied here.

Notes

The set_locs method must be called to enable the subsetting logic controlled by the minor_thresholds parameter.

In some cases such as the colorbar, there is no distinction between major and minor ticks; the tick locations might be set manually, or by a locator that puts ticks at integer powers of base and at intermediate locations. For this situation, disable the minor_thresholds logic by using minor_thresholds=(np.inf, np.inf), so that all ticks will be labeled.

To disable labeling of minor ticks when 'labelOnlyBase' is False, use minor_thresholds=(0, 0). This is the default for the "classic" style.

Examples

To label a subset of minor ticks when the view limits span up to 2 decades, and all of the ticks when zoomed in to 0.5 decades or less, use minor_thresholds=(2, 0.5).

To label all minor ticks when the view limits span up to 1.5 decades, use minor_thresholds=(1.5, 1.5).

base(base)[source]

Change the base for labeling.

Warning

Should always match the base used for LogLocator

format_data(value)[source]

Returns the full string representation of the value with the position unspecified.

format_data_short(value)[source]

Return a short formatted string representation of a number.

label_minor(labelOnlyBase)[source]

Switch minor tick labeling on or off.

Parameters:
labelOnlyBase : bool

If True, label ticks only at integer powers of base.

pprint_val(x, d)[source]
set_locs(locs=None)[source]

Use axis view limits to control which ticks are labeled.

The locs parameter is ignored in the present algorithm.

class matplotlib.ticker.LogFormatterExponent(base=10.0, labelOnlyBase=False, minor_thresholds=None, linthresh=None)[source]

Bases: matplotlib.ticker.LogFormatter

Format values for log axis using exponent = log_base(value).

class matplotlib.ticker.LogFormatterMathtext(base=10.0, labelOnlyBase=False, minor_thresholds=None, linthresh=None)[source]

Bases: matplotlib.ticker.LogFormatter

Format values for log axis using exponent = log_base(value).

class matplotlib.ticker.IndexFormatter(labels)[source]

Bases: matplotlib.ticker.Formatter

Format the position x to the nearest i-th label where i=int(x+0.5)

class matplotlib.ticker.LogFormatterSciNotation(base=10.0, labelOnlyBase=False, minor_thresholds=None, linthresh=None)[source]

Bases: matplotlib.ticker.LogFormatterMathtext

Format values following scientific notation in a logarithmic axis.

class matplotlib.ticker.LogitFormatter[source]

Bases: matplotlib.ticker.Formatter

Probability formatter (using Math text).

format_data_short(value)[source]

return a short formatted string representation of a number

class matplotlib.ticker.EngFormatter(unit='', places=None, sep=' ')[source]

Bases: matplotlib.ticker.Formatter

Formats axis values using engineering prefixes to represent powers of 1000, plus a specified unit, e.g., 10 MHz instead of 1e7.

Parameters:
unit : str (default: "")

Unit symbol to use, suitable for use with single-letter representations of powers of 1000. For example, 'Hz' or 'm'.

places : int (default: None)

Precision with which to display the number, specified in digits after the decimal point (there will be between one and three digits before the decimal point). If it is None, the formatting falls back to the floating point format '%g', which displays up to 6 significant digits, i.e. the equivalent value for places varies between 0 and 5 (inclusive).

sep : str (default: " ")

Separator used between the value and the prefix/unit. For example, one get '3.14 mV' if sep is " " (default) and '3.14mV' if sep is "". Besides the default behavior, some other useful options may be:

  • sep="" to append directly the prefix/unit to the value;
  • sep="\N{THIN SPACE}" (U+2009);
  • sep="\N{NARROW NO-BREAK SPACE}" (U+202F);
  • sep="\N{NO-BREAK SPACE}" (U+00A0).
ENG_PREFIXES = {-24: 'y', -21: 'z', -18: 'a', -15: 'f', -12: 'p', -9: 'n', -6: 'μ', -3: 'm', 0: '', 3: 'k', 6: 'M', 9: 'G', 12: 'T', 15: 'P', 18: 'E', 21: 'Z', 24: 'Y'}
format_eng(num)[source]

Formats a number in engineering notation, appending a letter representing the power of 1000 of the original number. Some examples:

>>> format_eng(0)       # for self.places = 0
'0'
>>> format_eng(1000000) # for self.places = 1
'1.0 M'
>>> format_eng("-1e-6") # for self.places = 2
'-1.00 μ'
class matplotlib.ticker.PercentFormatter(xmax=100, decimals=None, symbol='%', is_latex=False)[source]

Bases: matplotlib.ticker.Formatter

Format numbers as a percentage.

Parameters:
xmax : float

Determines how the number is converted into a percentage. xmax is the data value that corresponds to 100%. Percentages are computed as x / xmax * 100. So if the data is already scaled to be percentages, xmax will be 100. Another common situation is where xmax is 1.0.

decimals : None or int

The number of decimal places to place after the point. If None (the default), the number will be computed automatically.

symbol : string or None

A string that will be appended to the label. It may be None or empty to indicate that no symbol should be used. LaTeX special characters are escaped in symbol whenever latex mode is enabled, unless is_latex is True.

is_latex : bool

If False, reserved LaTeX characters in symbol will be escaped.

convert_to_pct(x)[source]
format_pct(x, display_range)[source]

Formats the number as a percentage number with the correct number of decimals and adds the percent symbol, if any.

If self.decimals is None, the number of digits after the decimal point is set based on the display_range of the axis as follows:

display_range decimals sample
>50 0 x = 34.5 => 35%
>5 1 x = 34.5 => 34.5%
>0.5 2 x = 34.5 => 34.50%
... ... ...

This method will not be very good for tiny axis ranges or extremely large ones. It assumes that the values on the chart are percentages displayed on a reasonable scale.

symbol

The configured percent symbol as a string.

If LaTeX is enabled via rcParams["text.usetex"], the special characters {'#', '$', '%', '&', '~', '_', '^', '\', '{', '}'} are automatically escaped in the string.

class matplotlib.ticker.Locator[source]

Bases: matplotlib.ticker.TickHelper

Determine the tick locations;

Note, you should not use the same locator between different Axis because the locator stores references to the Axis data and view limits

MAXTICKS = 1000
autoscale()[source]

autoscale the view limits

pan(numsteps)[source]

Pan numticks (can be positive or negative)

raise_if_exceeds(locs)[source]

raise a RuntimeError if Locator attempts to create more than MAXTICKS locs

refresh()[source]

refresh internal information based on current lim

set_params(**kwargs)[source]

Do nothing, and rase a warning. Any locator class not supporting the set_params() function will call this.

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
view_limits(vmin, vmax)[source]

select a scale for the range from vmin to vmax

Normally this method is overridden by subclasses to change locator behaviour.

zoom(direction)[source]

Zoom in/out on axis; if direction is >0 zoom in, else zoom out

class matplotlib.ticker.IndexLocator(base, offset)[source]

Bases: matplotlib.ticker.Locator

Place a tick on every multiple of some base number of points plotted, e.g., on every 5th point. It is assumed that you are doing index plotting; i.e., the axis is 0, len(data). This is mainly useful for x ticks.

place ticks on the i-th data points where (i-offset)%base==0

set_params(base=None, offset=None)[source]

Set parameters within this locator

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
class matplotlib.ticker.FixedLocator(locs, nbins=None)[source]

Bases: matplotlib.ticker.Locator

Tick locations are fixed. If nbins is not None, the array of possible positions will be subsampled to keep the number of ticks <= nbins +1. The subsampling will be done so as to include the smallest absolute value; for example, if zero is included in the array of possibilities, then it is guaranteed to be one of the chosen ticks.

set_params(nbins=None)[source]

Set parameters within this locator.

tick_values(vmin, vmax)[source]

" Return the locations of the ticks.

Note

Because the values are fixed, vmin and vmax are not used in this method.

class matplotlib.ticker.NullLocator[source]

Bases: matplotlib.ticker.Locator

No ticks

tick_values(vmin, vmax)[source]

" Return the locations of the ticks.

Note

Because the values are Null, vmin and vmax are not used in this method.

class matplotlib.ticker.LinearLocator(numticks=None, presets=None)[source]

Bases: matplotlib.ticker.Locator

Determine the tick locations

The first time this function is called it will try to set the number of ticks to make a nice tick partitioning. Thereafter the number of ticks will be fixed so that interactive navigation will be nice

Use presets to set locs based on lom. A dict mapping vmin, vmax->locs

set_params(numticks=None, presets=None)[source]

Set parameters within this locator.

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
view_limits(vmin, vmax)[source]

Try to choose the view limits intelligently

class matplotlib.ticker.LogLocator(base=10.0, subs=(1.0, ), numdecs=4, numticks=None)[source]

Bases: matplotlib.ticker.Locator

Determine the tick locations for log axes

Place ticks on the locations : subs[j] * base**i

Parameters:
subs : None, string, or sequence of float, optional, default (1.0,)

Gives the multiples of integer powers of the base at which to place ticks. The default places ticks only at integer powers of the base. The permitted string values are 'auto' and 'all', both of which use an algorithm based on the axis view limits to determine whether and how to put ticks between integer powers of the base. With 'auto', ticks are placed only between integer powers; with 'all', the integer powers are included. A value of None is equivalent to 'auto'.

base(base)[source]

set the base of the log scaling (major tick every base**i, i integer)

nonsingular(vmin, vmax)[source]
set_params(base=None, subs=None, numdecs=None, numticks=None)[source]

Set parameters within this locator.

subs(subs)[source]

set the minor ticks for the log scaling every base**i*subs[j]

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
view_limits(vmin, vmax)[source]

Try to choose the view limits intelligently

class matplotlib.ticker.AutoLocator[source]

Bases: matplotlib.ticker.MaxNLocator

Dynamically find major tick positions. This is actually a subclass of MaxNLocator, with parameters nbins = 'auto' and steps = [1, 2, 2.5, 5, 10].

To know the values of the non-public parameters, please have a look to the defaults of MaxNLocator.

class matplotlib.ticker.MultipleLocator(base=1.0)[source]

Bases: matplotlib.ticker.Locator

Set a tick on each integer multiple of a base within the view interval.

set_params(base)[source]

Set parameters within this locator.

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
view_limits(dmin, dmax)[source]

Set the view limits to the nearest multiples of base that contain the data.

class matplotlib.ticker.MaxNLocator(*args, **kwargs)[source]

Bases: matplotlib.ticker.Locator

Select no more than N intervals at nice locations.

Keyword args:

nbins
Maximum number of intervals; one less than max number of ticks. If the string 'auto', the number of bins will be automatically determined based on the length of the axis.
steps
Sequence of nice numbers starting with 1 and ending with 10; e.g., [1, 2, 4, 5, 10], where the values are acceptable tick multiples. i.e. for the example, 20, 40, 60 would be an acceptable set of ticks, as would 0.4, 0.6, 0.8, because they are multiples of 2. However, 30, 60, 90 would not be allowed because 3 does not appear in the list of steps.
integer
If True, ticks will take only integer values, provided at least min_n_ticks integers are found within the view limits.
symmetric
If True, autoscaling will result in a range symmetric about zero.
prune
['lower' | 'upper' | 'both' | None] Remove edge ticks -- useful for stacked or ganged plots where the upper tick of one axes overlaps with the lower tick of the axes above it, primarily when rcParams["axes.autolimit_mode"] is 'round_numbers'. If prune=='lower', the smallest tick will be removed. If prune == 'upper', the largest tick will be removed. If prune == 'both', the largest and smallest ticks will be removed. If prune == None, no ticks will be removed.
min_n_ticks
Relax nbins and integer constraints if necessary to obtain this minimum number of ticks.
default_params = {'integer': False, 'min_n_ticks': 2, 'nbins': 10, 'prune': None, 'steps': None, 'symmetric': False}
set_params(**kwargs)[source]

Set parameters within this locator.

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
view_limits(dmin, dmax)[source]

select a scale for the range from vmin to vmax

Normally this method is overridden by subclasses to change locator behaviour.

class matplotlib.ticker.AutoMinorLocator(n=None)[source]

Bases: matplotlib.ticker.Locator

Dynamically find minor tick positions based on the positions of major ticks. The scale must be linear with major ticks evenly spaced.

n is the number of subdivisions of the interval between major ticks; e.g., n=2 will place a single minor tick midway between major ticks.

If n is omitted or None, it will be set to 5 or 4.

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
class matplotlib.ticker.SymmetricalLogLocator(transform=None, subs=None, linthresh=None, base=None)[source]

Bases: matplotlib.ticker.Locator

Determine the tick locations for symmetric log axes

place ticks on the location= base**i*subs[j]

set_params(subs=None, numticks=None)[source]

Set parameters within this locator.

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]
view_limits(vmin, vmax)[source]

Try to choose the view limits intelligently

class matplotlib.ticker.LogitLocator(minor=False)[source]

Bases: matplotlib.ticker.Locator

Determine the tick locations for logit axes

place ticks on the logit locations

nonsingular(vmin, vmax)[source]
set_params(minor=None)[source]

Set parameters within this locator.

tick_values(vmin, vmax)[source]

Return the values of the located ticks given vmin and vmax.

Note

To get tick locations with the vmin and vmax values defined automatically for the associated axis simply call the Locator instance:

>>> print(type(loc))
<type 'Locator'>
>>> print(loc())
[1, 2, 3, 4]