Learn what to expect in the new updates
Contents
matplotlib
has an extensive codebase that can be daunting to many
new users. However, most of matplotlib can be understood with a fairly
simple conceptual framework and knowledge of a few important points.
Plotting requires action on a range of levels, from the most general (e.g., ‘contour this 2-D array’) to the most specific (e.g., ‘color this screen pixel red’). The purpose of a plotting package is to assist you in visualizing your data as easily as possible, with all the necessary control – that is, by using relatively high-level commands most of the time, and still have the ability to use the low-level commands when needed.
Therefore, everything in matplotlib is organized in a hierarchy. At the top
of the hierarchy is the matplotlib “state-machine environment” which is
provided by the matplotlib.pyplot
module. At this level, simple
functions are used to add plot elements (lines, images, text, etc.) to
the current axes in the current figure.
Note
Pyplot’s state-machine environment behaves similarly to MATLAB and should be most familiar to users with MATLAB experience.
The next level down in the hierarchy is the first level of the object-oriented interface, in which pyplot is used only for a few functions such as figure creation, and the user explicitly creates and keeps track of the figure and axes objects. At this level, the user uses pyplot to create figures, and through those figures, one or more axes objects can be created. These axes objects are then used for most plotting actions.
For even more control – which is essential for things like embedding matplotlib plots in GUI applications – the pyplot level may be dropped completely, leaving a purely object-oriented approach.
Figure
¶The whole figure (marked as the outer red box). The figure keeps
track of all the child Axes
, a smattering of
‘special’ artists (titles, figure legends, etc), and the canvas.
(Don’t worry too much about the canvas, it is crucial as it is the
object that actually does the drawing to get you your plot, but as the
user it is more-or-less invisible to you). A figure can have any
number of Axes
, but to be useful should have
at least one.
The easiest way to create a new figure is with pyplot:
fig = plt.figure() # an empty figure with no axes
fig, ax_lst = plt.subplots(2, 2) # a figure with a 2x2 grid of Axes
Axes
¶This is what you think of as ‘a plot’, it is the region of the image
with the data space (marked as the inner blue box). A given figure
can contain many Axes, but a given Axes
object can only be in one Figure
. The
Axes contains two (or three in the case of 3D)
Axis
objects (be aware of the difference
between Axes and Axis) which take care of the data limits (the
data limits can also be controlled via set via the
set_xlim()
and
set_ylim()
Axes
methods). Each
Axes
has a title (set via
set_title()
), an x-label (set via
set_xlabel()
), and a y-label set via
set_ylabel()
).
The Axes
class and it’s member functions are the primary entry
point to working with the OO interface.
Axis
¶These are the number-line-like objects (circled in green). They take
care of setting the graph limits and generating the ticks (the marks
on the axis) and ticklabels (strings labeling the ticks). The
location of the ticks is determined by a
Locator
object and the ticklabel strings
are formatted by a Formatter
. The
combination of the correct Locator
and Formatter
gives
very fine control over the tick locations and labels.
Artist
¶Basically everything you can see on the figure is an artist (even the
Figure
, Axes
, and Axis
objects). This
includes Text
objects, Line2D
objects,
collection
objects, Patch
objects ... (you get the
idea). When the figure is rendered, all of the artists are drawn to
the canvas. Most Artists are tied to an Axes; such an Artist
cannot be shared by multiple Axes, or moved from one to another.
All of plotting functions expect np.array
or np.ma.masked_array
as
input. Classes that are ‘array-like’ such as pandas
data objects
and np.matrix
may or may not work as intended. It is best to
convert these to np.array
objects prior to plotting.
For example, to covert a pandas.DataFrame
a = pandas.DataFrame(np.random.rand(4,5), columns = list('abcde'))
a_asndarray = a.values
and to covert a np.matrix
b = np.matrix([[1,2],[3,4]])
b_asarray = np.asarray(b)
When viewing this documentation and examples, you will find different coding styles and usage patterns. These styles are perfectly valid and have their pros and cons. Just about all of the examples can be converted into another style and achieve the same results. The only caveat is to avoid mixing the coding styles for your own code.
Note
Developers for matplotlib have to follow a specific style and guidelines. See The Matplotlib Developers’ Guide.
Of the different styles, there are two that are officially supported. Therefore, these are the preferred ways to use matplotlib.
For the pyplot style, the imports at the top of your scripts will typically be:
import matplotlib.pyplot as plt
import numpy as np
Then one calls, for example, np.arange, np.zeros, np.pi, plt.figure, plt.plot, plt.show, etc. Use the pyplot interface for creating figures, and then use the object methods for the rest:
import matplotlib.pyplot as plt
import numpy as np
x = np.arange(0, 10, 0.2)
y = np.sin(x)
fig = plt.figure()
ax = fig.add_subplot(111)
ax.plot(x, y)
plt.show()
So, why all the extra typing instead of the MATLAB-style (which relies on global state and a flat namespace)? For very simple things like this example, the only advantage is academic: the wordier styles are more explicit, more clear as to where things come from and what is going on. For more complicated applications, this explicitness and clarity becomes increasingly valuable, and the richer and more complete object-oriented interface will likely make the program easier to write and maintain.
Typically one finds oneself making the same plots over and over again, but with different data sets, which leads to needing to write specialized functions to do the plotting. The recommended function signature is something like:
def my_plotter(ax, data1, data2, param_dict):
"""
A helper function to make a graph
Parameters
----------
ax : Axes
The axes to draw to
data1 : array
The x data
data2 : array
The y data
param_dict : dict
Dictionary of kwargs to pass to ax.plot
Returns
-------
out : list
list of artists added
"""
out = ax.plot(data1, data2, **param_dict)
return out
which you would then use as:
fig, ax = plt.subplots(1, 1)
my_plotter(ax, data1, data2, {'marker':'x'})
or if you wanted to have 2 sub-plots:
fig, (ax1, ax2) = plt.subplots(1, 2)
my_plotter(ax1, data1, data2, {'marker':'x'})
my_plotter(ax2, data3, data4, {'marker':'o'})
Again, for these simple examples this style seems like overkill, however once the graphs get slightly more complex it pays off.
A lot of documentation on the website and in the mailing lists refers to the “backend” and many new users are confused by this term. matplotlib targets many different use cases and output formats. Some people use matplotlib interactively from the python shell and have plotting windows pop up when they type commands. Some people embed matplotlib into graphical user interfaces like wxpython or pygtk to build rich applications. Others use matplotlib in batch scripts to generate postscript images from some numerical simulations, and still others in web application servers to dynamically serve up graphs.
To support all of these use cases, matplotlib can target different outputs, and each of these capabilities is called a backend; the “frontend” is the user facing code, i.e., the plotting code, whereas the “backend” does all the hard work behind-the-scenes to make the figure. There are two types of backends: user interface backends (for use in pygtk, wxpython, tkinter, qt4, or macosx; also referred to as “interactive backends”) and hardcopy backends to make image files (PNG, SVG, PDF, PS; also referred to as “non-interactive backends”).
There are a four ways to configure your backend. If they conflict each other,
the method mentioned last in the following list will be used, e.g. calling
use()
will override the setting in your matplotlibrc
.
The backend
parameter in your matplotlibrc
file (see
Customizing matplotlib):
backend : WXAgg # use wxpython with antigrain (agg) rendering
Setting the MPLBACKEND
environment
variable, either for your current shell or for a single script:
> export MPLBACKEND="module://my_backend"
> python simple_plot.py
> MPLBACKEND="module://my_backend" python simple_plot.py
Setting this environment variable will override the backend
parameter
in any matplotlibrc
, even if there is a matplotlibrc
in your
current working directory. Therefore setting MPLBACKEND
globally, e.g. in your .bashrc
or .profile
, is discouraged as it
might lead to counter-intuitive behavior.
To set the backend for a single script, you can alternatively use the -d
command line argument:
> python script.py -dbackend
This method is deprecated as the -d
argument might conflict with
scripts which parse command line arguments (see issue
#1986). You
should use MPLBACKEND
instead.
If your script depends on a specific backend you can use the
use()
function:
import matplotlib
matplotlib.use('PS') # generate postscript output by default
If you use the use()
function, this must be done before
importing matplotlib.pyplot
. Calling use()
after
pyplot has been imported will have no effect. Using
use()
will require changes in your code if users want to
use a different backend. Therefore, you should avoid explicitly calling
use()
unless absolutely necessary.
Note
Backend name specifications are not case-sensitive; e.g., ‘GTKAgg’ and ‘gtkagg’ are equivalent.
With a typical installation of matplotlib, such as from a binary installer or a linux distribution package, a good default backend will already be set, allowing both interactive work and plotting from scripts, with output to the screen and/or to a file, so at least initially you will not need to use any of the methods given above.
If, however, you want to write graphical user interfaces, or a web
application server (Matplotlib in a web application server), or need a better
understanding of what is going on, read on. To make things a little
more customizable for graphical user interfaces, matplotlib separates
the concept of the renderer (the thing that actually does the drawing)
from the canvas (the place where the drawing goes). The canonical
renderer for user interfaces is Agg
which uses the Anti-Grain
Geometry C++ library to make a raster (pixel) image of the figure.
All of the user interfaces except macosx
can be used with
agg rendering, e.g.,
WXAgg
, GTKAgg
, QT4Agg
, TkAgg
. In
addition, some of the user interfaces support other rendering engines.
For example, with GTK, you can also select GDK rendering (backend
GTK
) or Cairo rendering (backend GTKCairo
).
For the rendering engines, one can also distinguish between vector or raster renderers. Vector graphics languages issue drawing commands like “draw a line from this point to this point” and hence are scale free, and raster backends generate a pixel representation of the line whose accuracy depends on a DPI setting.
Here is a summary of the matplotlib renderers (there is an eponymous backed for each; these are non-interactive backends, capable of writing to a file):
Renderer | Filetypes | Description |
---|---|---|
AGG | png | raster graphics – high quality images using the Anti-Grain Geometry engine |
PS | ps eps | vector graphics – Postscript output |
vector graphics – Portable Document Format | ||
SVG | svg | vector graphics – Scalable Vector Graphics |
Cairo | png ps pdf svg ... | vector graphics – Cairo graphics |
GDK | png jpg tiff ... | raster graphics – the Gimp Drawing Kit |
And here are the user interfaces and renderer combinations supported; these are interactive backends, capable of displaying to the screen and of using appropriate renderers from the table above to write to a file:
Backend | Description |
---|---|
GTKAgg | Agg rendering to a GTK 2.x canvas (requires PyGTK and pycairo or cairocffi; Python2 only) |
GTK3Agg | Agg rendering to a GTK 3.x canvas (requires PyGObject and pycairo or cairocffi) |
GTK | GDK rendering to a GTK 2.x canvas (not recommended) (requires PyGTK and pycairo or cairocffi; Python2 only) |
GTKCairo | Cairo rendering to a GTK 2.x canvas (requires PyGTK and pycairo or cairocffi; Python2 only) |
GTK3Cairo | Cairo rendering to a GTK 3.x canvas (requires PyGObject and pycairo or cairocffi) |
WXAgg | Agg rendering to to a wxWidgets canvas (requires wxPython) |
WX | Native wxWidgets drawing to a wxWidgets Canvas (not recommended) (requires wxPython) |
TkAgg | Agg rendering to a Tk canvas (requires TkInter) |
Qt4Agg | Agg rendering to a Qt4 canvas (requires PyQt4 or pyside ) |
Qt5Agg | Agg rendering in a Qt5 canvas (requires PyQt5) |
macosx | Cocoa rendering in OSX windows (presently lacks blocking show() behavior when matplotlib is in non-interactive mode) |
At present the release version of wxPython
(also known as wxPython classic)
does not support python3. A work in progress redesigned version known as
wxPython-Phoenix does support python3.
Matplotlib should work with both versions.
Both GTK2
and GTK3
have implicit dependencies on PyCairo regardless of the
specific Matplotlib backend used. Unfortunatly the latest release of PyCairo
for Python3 does not implement the Python wrappers needed for the GTK3Agg
backend. Cairocffi
can be used as a replacement which implements the correct
wrapper.
You can choose either PyQt4 or PySide when using the qt4
backend by setting
the appropriate value for backend.qt4
in your matplotlibrc
file. The
default value is PyQt4
.
The setting in your matplotlibrc
file can be overridden by setting the
QT_API
environment variable to either pyqt
or pyside
to use PyQt4
or
PySide
, respectively.
Since the default value for the bindings to be used is PyQt4
,
matplotlib
first tries to import it, if the import fails, it tries to
import PySide
.
Use of an interactive backend (see What is a backend?)
permits–but does not by itself require or ensure–plotting
to the screen. Whether and when plotting to the screen occurs,
and whether a script or shell session continues after a plot
is drawn on the screen, depends on the functions and methods
that are called, and on a state variable that determines whether
matplotlib is in “interactive mode”. The default Boolean value is set
by the matplotlibrc
file, and may be customized like any other
configuration parameter (see Customizing matplotlib). It
may also be set via matplotlib.interactive()
, and its
value may be queried via matplotlib.is_interactive()
. Turning
interactive mode on and off in the middle of a stream of plotting
commands, whether in a script or in a shell, is rarely needed
and potentially confusing, so in the following we will assume all
plotting is done with interactive mode either on or off.
Note
Major changes related to interactivity, and in particular the
role and behavior of show()
, were made in the
transition to matplotlib version 1.0, and bugs were fixed in
1.0.1. Here we describe the version 1.0.1 behavior for the
primary interactive backends, with the partial exception of
macosx.
Interactive mode may also be turned on via matplotlib.pyplot.ion()
,
and turned off via matplotlib.pyplot.ioff()
.
Note
Interactive mode works with suitable backends in ipython and in the ordinary python shell, but it does not work in the IDLE IDE. If the default backend does not support interactivity, an interactive backend can be explicitly activated using any of the methods discussed in What is a backend?.
From an ordinary python prompt, or after invoking ipython with no options, try this:
import matplotlib.pyplot as plt
plt.ion()
plt.plot([1.6, 2.7])
Assuming you are running version 1.0.1 or higher, and you have an interactive backend installed and selected by default, you should see a plot, and your terminal prompt should also be active; you can type additional commands such as:
plt.title("interactive test")
plt.xlabel("index")
and you will see the plot being updated after each line. This is
because you are in interactive mode and you are using pyplot
functions. Now try an alternative method of modifying the
plot. Get a reference to the Axes
instance, and
call a method of that instance:
ax = plt.gca()
ax.plot([3.1, 2.2])
Nothing changed, because the Axes methods do not include an
automatic call to draw_if_interactive()
;
that call is added by the pyplot functions. If you are using
methods, then when you want to update the plot on the screen,
you need to call draw()
:
plt.draw()
Now you should see the new line added to the plot.
Start a fresh session as in the previous example, but now turn interactive mode off:
import matplotlib.pyplot as plt
plt.ioff()
plt.plot([1.6, 2.7])
Nothing happened–or at least nothing has shown up on the screen (unless you are using macosx backend, which is anomalous). To make the plot appear, you need to do this:
plt.show()
Now you see the plot, but your terminal command line is
unresponsive; the show()
command blocks the input
of additional commands until you manually kill the plot
window.
What good is this–being forced to use a blocking function? Suppose you need a script that plots the contents of a file to the screen. You want to look at that plot, and then end the script. Without some blocking command such as show(), the script would flash up the plot and then end immediately, leaving nothing on the screen.
In addition, non-interactive mode delays all drawing until show() is called; this is more efficient than redrawing the plot each time a line in the script adds a new feature.
Prior to version 1.0, show() generally could not be called more than once in a single script (although sometimes one could get away with it); for version 1.0.1 and above, this restriction is lifted, so one can write a script like this:
import numpy as np
import matplotlib.pyplot as plt
plt.ioff()
for i in range(3):
plt.plot(np.random.rand(10))
plt.show()
which makes three plots, one at a time.
In interactive mode, pyplot functions automatically draw to the screen.
When plotting interactively, if using
object method calls in addition to pyplot functions, then
call draw()
whenever you want to
refresh the plot.
Use non-interactive mode in scripts in which you want to
generate one or more figures and display them before ending
or generating a new set of figures. In that case, use
show()
to display the figure(s) and
to block execution until you have manually destroyed them.